SKU #: PF-A4SPBD101-Main Airdog 4G Air Fuel Separation System 98.5-04 Dodge 5.9L Cummins With Block Mounted Pump

$656.00 $729.00
Airdog Tax Season Sale: $73.00
Purchase Airdog 4G Air Fuel Separation System 98.5-04 Dodge 5.9L Cummins With Block Mounted Pump
    • 1998.5-2004.5 Dodge 5.9L Cummins
    • WITHOUT In-Tank Fuel Pump*
  • Options



Description

The factory block mounted lift pumps found on the 1998.5-2004.5 Cummins have proven themselves as being nothing better than a temporary Band-Aid. Further, as the lift pumps failed, it would cause prem ... read more

  • Share

Fast and Free Shipping On Orders Over $199

No Salesmen, Just Enthusiasts 888.993.4373

The factory block mounted lift pumps found on the 1998.5-2004.5 Cummins have proven themselves as being nothing better than a temporary Band-Aid. Further, as the lift pumps failed, it would cause premature failure of the injection pump especially in VP44 applications. While Dodge began retrofitting fuel pumps from the block to inside of the fuel tank, it has been shown that this conversion is better than the original units, but still not adequate, especially for those that have made any performance upgrades whatsoever. This pump kit is designed for those trucks that are currently running the original style block mounted pumps and will deliver eith 100 or 150 gallons per hour (GPH) of fuel, enough to support stock to 500+ rear wheel horsepower.

AirDog 4G is designed to operate at flows and pressures beyond the maximum requirements of the engine. It receives fuel under vacuum from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of water.

The fuel passes through the water separator which removes the large particulate contaminates that could damage or jam the gear rotor fuel pump. The fuel, with only entrained air/vapor and tiny particulate contaminates remaining enters the fuel pump.

The fuel, now under positive pressure flow, enters the fuel filter. As the fuel passes through the filter media and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated. Through the positive fuel air separation features of the patented AirDog 4G the separated air/vapor is discharged from the filter and back to the fuel tank through the Primary Air/Vapor Discharge Port.

The fuel passing through the filter media is now free of contaminates and power robbing air/vapor. At pressures and flows able to meet the needs of the engine, it exits the fuel filter through two passageways. First, the fuel for the engine passes into the fuel pickup tube and on to the engine. Then, the excess fuel not needed by the engine recycles internally through the pressure regulator back to the water separator.

Unsure of whether you need the Airdog 100 or the Airdog 150? - Put it this way...if your truck is stock, or moderately stock(up to 500hp) you want the 100. If you've added a 100hp injectors or larger(500hp+), you will want the 150. If you have any questions, give us a call

carb California Air Resource Board D-595-3

Specifications

  • ManufacturerAirDog | PureFlow Technologies
  • MPNA4SPBD101 | A4SPBD104
INSTALLATION KIT CONTENTS:
  • Relay Control Wiring Harness
  • All Fuel Fittings Required
  • Mounting Hardware
  • 1/2" Fuel Lines W/ OEM Style Quick Connect Fittings
  • AirDog I-4G Bracket & Spacer
  • Plastic Ties
  • Installation Manual
FEATURES & BENEFITS:
  • Maintaining Correct Injection Timing
  • Eliminating Spray Pattern Disruption
  • Allowing for a Full Power Stroke and Complete Burn
  • Increased Fuel Economy
  • Increased Power Output
  • Increased Torque Output
  • Longer Injector Life
  • Improved Throttle Response
  • Reduced Exhaust Emissions
  • Optimized Engine Performance
  • AirDog I-4G also overcomes loss of power for diesel engines operating at higher altitudes.
  • AirDog I-4G - Advanced Fuel/Air Separation Fuel Saving Benefits and Technology
  • Dual Feed Gerotor Pump
  • Low amperage motor provides efficiency and endurance
  • Self-aligning motor requires less maintenance and reduces noise levels
  • Intermediate pump shaft separates motor from fuel
  • Small Compact: ONLY 7"L X 10"T X 3.2"W

NO VIDEOS AVAILABLE

Blog Posts

Recommended Products

Recently Viewed

Added To Cart

Airdog 4G Air Fuel Separation System 98.5-04 Dodge 5.9L Cummins With Block Mounted Pump

Airdog 4G Air Fuel Separation System 98.5-04 Dodge 5.9L Cummins With Block Mounted Pump

Quantity: 0