DODGE RAM FITMENT GUIDE
2003-2013 Ram 2500 4x4
2003-2012 Ram 3500 4x4
2006-2008 Ram 1500 Mega Cab 4x4
1994-2002 Ram 2500 / 3500 (Requires Conversion Bracket, see Related Products section below)
Contructed from 1.50 x .250 wall Chromoly tube
CNC bent for perfect fitment
Tig-Welded in house
7/8" bearing on the axle side
Delrin bushin on frame side
With a 7/8 chromoly bearing on the axle side, and a Delrin style bushing on the frame side, you will feel much tighter and controlled front end. Each bar is constructed of 11/2 .25 wall chromoly to ensure maximum strength. The pan rod bar will also allow you to center the axle after installing the suspension system.
The Dodge mounting point on the frame is thin wall steel and uses a 14mm bolt. That is why we do not incorporate bearings on both ends. By not using a bearing on both ends, there is a safety zone for additional give under extreme conditions, which will not egg out your bolt hole, or worse, shear the bolt off entirely.
NEW 6" Track Bar Option!
Now available for trucks with up to 6 inches of front lift for 2003-2013 Rams! If you are running a 6" lift, previously you could not install a Carli track bar. However, Carli has just introduced their track bar drop bracket to be used in conjunction with their newly designed track bar to properly recenter the axle on taller lifts. Simply choose how much front end lift you have from the drop down box below.
Note: All 94-02 Trucks require the use of the conversion bracket pictured below in "Related Products" for this bar to work.
Click HERE for installation instructions
"Smoother steering, center your axle and rely on chromoly construction."
Do you own this product and want to leave a review? You must register or login to your account to leave a product rating.
Click Here to sign into your account OR
Click Here to create an account.
Sort: New to Old RE-SORT COMMENTS: