Mag-Hytec
Dana #60-DF Front Differential Cover
1989-2002 Dodge Ram 2500/3500
Mag-Hytec has introduced a Dana 60 front differential cover that adds a quart of capacity over the stock cover (up from 3-3.5 quarts stock to 4-4.5 quarts). It is a perfect match in appearance and function to the rear differential covers. Perhaps the most important feature for off-road use of your four wheel drive Turbo Diesel is the angled ramp on the bottom half of the cover, instead of a flat mounting flange. The purpose for this ramp is that if you hit a rock or other obstruction on the trail, the differential will tend to ride up and over it instead of smashing the cover into the gears.
FEATURES:
-
Magnetic drain plug and anodized aluminum dipstick with magnetic insert
-
O-rings require no gaskets or sealant
-
Routing lube maintenance without removing the differential cover
-
1/8 NPT temperature sender port
-
303 stainless steel hardware
-
Lube level reference plug
-
Finned aircraft aluminum housing
-
Requires allen key wrenches (included) for installation and service
-
Fits with most factory suspension systems and aftermarket anti-sway bars
Installation Instructions
NOTE: Installation of the cover is just a bit more involved than for the other Mag-Hytec covers. You need to pop the drivers side tie rod end loose from the steering knuckle to give clearance between the ring gear and the steering rod. Mag-Hytec - DANA 60 Front Differential Cover
NOTE: 2002 truck owners with vented differential cover, please select part number: MHDANA60V from the option below.