FUEL YOUR RIDE WITH EFFICIENCY AND POWER!
Adjustability: The HPFP is even now available with a built-in ADJUSTABLE regulator, for those needing to fine tune the exact pressure output of the fuel/lift pump! These adjustable pumps can be tuned between 0 and 160PSI. The Adjustable models also include a boost port on top that you can plumb a boost line to, then it will automatically give the truck more fuel when you need it.
FASS HPFP is available in the following Flow Rates:
95gph is for stock to 500HP applications. This is the kit for most people.
150gph is for 500HP to 700HP applications.
220gph/260gph is for 700HP+ applications only.
Note: You do not want to run a pump with a higher gallon per hour rating than your engines horsepower or the life of the FASS fuel pump will be greatly reduced. Pump noise is greatly enhanced with the larger flowing pumps.
Diesel Power Products also carries FASS air/water separators. They maximize the cleanliness of your fuel and helps your engine last longer and increases the fuel economy. Give us a call if you have any questions about the FASS fuel pumps or air/water separators. The FASS water separators are made in 3 different configurations:
Platinum Series is the new FASS Series that features a two-in-one water separator and fuel filter.
Titanium Series is the same as the old FASS 95
Series which has a new, smaller, more compact set-up with smaller
filters. Filter life is about1/3 to 1/2 that of the HD Series filters
HD Series is the same as the old FASS 150 Series which is the same FASS system that we have been selling for quite some time. Uses the same filters as before.
Notes: All FASS High Performance Fuel Pump systems are complete kits. They come with the hoses, fittings, mounting hardware, etc to do the job. Everything needed to complete the install should be included, except tools and wire ties.
1998.5-04.5 Note
If you have a 98.5-04.5 truck it came from the factory with a block mounted lift pump. Dodge has retrofitted many of these trucks with the later in-tank pumps. Before ordering you need to determine where your current lift pump is. This can easily be done by turning the key on and listening for the pump. If you have the in-tank retrofit kit you will need to order a pick-up tube kit (sku# STK-1001), which is available in the drop down labeled "Lift Pump Location," and you will choose the option "In-Tank."