|
2006-2009 6.6L LLY / LBZ / LMM GM Duramax
Industrial Injection Modified / Dragon Fire CP3 Injection Pump
The line of Modified CP3's offered by Industrial Injection was created to keep up with the varying demands of aggressive fueling chips and large injectors. Industrial Injection offers the Modified CP3 injection pump in two different flow levels: 42% and 85%. Each flow rate are varying degrees of flow improvement over the stock CP3 pump. The Modified 42% will typically increase horsepower by 100+ rear wheel horsepower. The Modified / Dragon Fire 85% is only recommended for trucks with high fueling enhancements, and horsepower levels will vary depending on how your Duramax is set up. Modified 42% and 85% pumps are available as new or remanufactured units, simply choose what you prefer from the drop down box below. Don't let the loss of fuel pressure dampen your day at the dyno or on the track!
*NOTE: Horsepower levels vary by truck / existing performance modifications.
*NOTE: Industrial Injection CP3 pumps require a $700 mandatory core charge. If you prefer to keep your existing CP3, you will be charged an additional $700 core charge, which is shown in the drop down box below. If you prefer to send in your existing CP3, you will be charged a fully refundable $700 core charge, which will be refunded to you once we receive your pump, and inspect it for any damage. If the pump is damaged, the core charge will not be refunded.
|