2007.5+ 6.7L Dodge Cummins
Industrial Injection Silver PhatShaft / Silver Bullet Turbo
Another first! The Silver Series PhatShaft is the latest effort to achieve perfection by Industrial Injection. Much like the Super PhatShaft, it was designed to handle multiple fueling upgrades, and comes in three sizes: 62mm, 64mm, and 66mm. What separates the Silver PhatShaft from the Super Phatshaft, is the new 74mm turbine wheel. To improve on the Super PhatShaft turbos, Industrial needed to improve performance at a lower RPM range and needed to reduce compressor surge. So they came up with the 74mm turbine, which is the latest in turbine trim design technology. The new trim design transfers exhaust gas energy more efficiently than any other turbine on the market, allowing for better exhaust gas expulsion, which results in lower EGT’s (Exhaust Gas Temperature), and quicker rotor acceleration. The most important benefit of the 74 mm turbine wheel is that it gets rid of turbo surge and broadens the power band range. Another identifying characteristic of the Silver series PhatShaft is the polished compressor housing. The Silver series utilizes the proven 14cm exhaust housing with a modified exhaust nozzle angle. The wastegate ports are also maximized and the wastegate chamber is enlarged for full wastegate travel. Like all PhatShaft turbochargers, they are equipped with dual grooved high performance bearings and an adjustable boost elbow. The Silver series chargers have been proven to support up to 800hp and are the best turbochargers on the market today.
Industrial
Injection's line of Silver PhatShaft / Silver Bullet turbos for the 6.7L Cummins remove the
factory exhaust brake and VGT activation. For this reason, on the
6.7L's, they are NOT a bolt-in application. For a proper installation,
Industrial Injection recommends using an HX40 style downpipe (which
will remove the factory catalytic converter in the downpipe), a 2-piece
Pulse type manifold, and an EGR (Exhaust Gas Recirculator) blocker
plate. Also, a Smarty 67ME or H&S Programmer are required for
proper ECM function.
*NOTE: Simply choose what size compressor housing you want from the options below.