|
Techni-Cooler® Intercooler System
2008-10 Ford 6.4L Power Stroke
Techni-Cooler dramatically increases the
cooling capacity by balancing the richer fuel mixture with greater
airflow and cooler, denser air. Denser air has more oxygen, which
improves combustion as well as engine efficiency. Result: higher
continuous power and more power at any exhaust gas temp (EGT), better
fuel economy and lower EGTs. That's a truckload of benefits! Banks
Techni-Cooler delivers the maximum reduction in boost air temperature
with a minimal loss of boost pressure. It doesn't get any cooler than
Techni-Cooler!
|
Banks Techni-Cooler Intercooler
Simple Reasons why the Banks Intercooler is a great competitor!
- Boost gain over stock.
If an aftermarket intercooler can't deliver a boost increase over the
stock unit, there's no point in taking it out of the box. Techni-Cooler delivered over ½ pound more boost!
- Air density increase.
It's Mechanical Engineering 101. Cold, dense intake air means more
oxygen and lower EGT's. It improves economy and unlocks your fuel's
power making ability. Techni-Cooler delivered over 5% more air density!
- Improved airflow though to the radiator.
Super-thick intercoolers block vital airflow to the vehicle radiator,
resulting in high temps that cause the ECU to cut back fuel, leaving you
with de-rated power and heat-related breakdowns. Techni-Cooler delivered over 14% more flow without starving the airflow to the radiator!
That's what you call a win-win-win situation. Banks 6.4L Power Stroke Techni-Cooler is the only unit that's been tested and proven to beat the competition on all three counts.
It's easy to see how Banks Techni-Cooler (center) does the optimum job of cooling incoming boosted air without losing pressure or starving radiator airflow when compared to another aftermarket intercooler (bottom) and the stock unit (top).
Airflow is Vital to Cooling
The crude bar-and-plate cores used by the competition impede flow to the radiator due to sloppy aerodynamics.
Computational Fluid Dynamics (CFD)
CFD designed, rugged cast aluminum end tanks insure durability and slick air flow. The same can't be said for welded-up sheet tanks. Air doesn't flow well with square corners, and the welds break at high boost when performance is needed the most.
SKU:BAN-25984
|
|
|
Weight:80.00
|
|
Dimensions:36x12x12
|
| DPP Price: $1,151.10 |
Quantity:
|
Product Rating:  (0.00) # of Ratings: 0 (Only registered customers can rate)
There are no comments for this product.
|
|