FEATURES
- Superior Ride Quality
- Very Controlled Off Road
- Increased Cornering Capability
- Reducing and/or Eliminating Body Roll
- Tighter street feel Driving Characteristics, Increased Suspension Response
- Steering geometry is all within OEM specs, no additional components are necessary
- Towing/hauling capacity is the same as OEM, no reduction of capability
|
COMPONENTS
- King Pintop 2.5" Remote Reservoir Shocks
- King Piggy Back 2.5" Remote Reservoir Shocks
- Carli Multi-Rate Coil Springs
- Radius Arm Drop Bracket Kit with Dimple Die Cross Member
- Sway Bar End links
- Adjustable Track Bar
- 6 Leaf Progressive Add-A-Pack
- Front Bumpstop Drops
- Extended Braided Brake Lines
|
 |
Ford Super Duty Adjustable Track Bar
We designed our Adjustable Track Bar with a machined tapered rod end with a custom angle offset to increase ball joint life. This design puts less stress on the ball joint at full droop and keeps the ball joint pin vertical at ride height, prolonging the life of wear items. A big 7/8" heim joint is used on the frame side and it comes with custom machined misalignment spacers. Constructed out of heavy wall chromoly tube
SPECIFICATIONS
- Constructed from 1.50 x .250 chromoly tube
- 7/8" Heim with 7/8" shaft
- Custom machined misalignment spacers
- Custom offset machined tapered rod end
|
Ford Super Duty Coil Springs
Our Multi-Rate coil springs are built with a custom wind, giving them a progressive variable rate. Our design delivers smooth initial compression feel on highway chatter and small bumps as well as smooth rate transition to higher rates as the suspension cycles deeper into the travel.
SPECIFICATIONS
- 4.5" of lift
- Side specific engineering
- Powder coated
- Shot peened and pre set
|
 |
 |
Ford Super Duty Radius Arm Drop Down Brackets
These Radius Arm Drop Bracket kits are built to exacting standards that would meet the criteria of even the most discerning drivers. The brackets are geometrically correct meaning the "wander" that most "lift kits" experience is non-existent. These kits are meant for real world drivers that will not accept the normal compromises of owning a lifted truck.
SPECIFICATIONS
- Geometrically Correct
- Beefy 1/4" Steel Construction
- Expertly Welded
- Powder Coated
- Easy to Bolt On
|
|