Hawk Performance has applied their severe-duty brake pad friction technology to the braking demands of trucks and SUVs. Heavier vehicles with larger brake systems are more likely to experience higher temperatures, requiring a brake pad that has excellent heat dissipation characteristics.
Hawk Performance’s established and proven Ferro-Carbon formulation to provide superior stopping power for full-sized light trucks, SUVs and vans without noise and dust.
Hawk Performance burnishes its LTS brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance
Bed-In Instructions
1.After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
2.Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.
3.DO NOT DRAG BRAKES!
4.Allow 15 minutes for brake system to cool down.
5.After step 4 your new pads are ready for use.