|
MADS Electronics
Smarty SSR59
2003-07 Dodge Cummins Diesel Truck
SMARTY is THE best programmer on the market for the 03-07 5.9L Cummins with the S-06 REVO, REVO TNT and TNT-R. Now they have taken it to a whole new level with the SSR (Super Sport Revo).
We at Diesel Power Products got one of the test models before launch and were absolutely amazed by the performance gains it granted us. We let the SSR go between a few of our trucks and it was like a drug, everyone needed it once they had used it. All of our 03-07 trucks have now been permanently upgraded to the SSR. We wont go back to any other tuner on our 03-07 Cummins.
The SSR offers the unparalleled ability to completely dial in your Cummins. No more timing rattle, no more excessive smoke where you don't want it just pure power. Diesel Power Products offers a money back, no questions asked return policy on the Smarty.
Installation Manual Available Now!
SSR_Tuning_Instructions.pdf
NOTE: THE SSR IS NOT FOR A STOCK OR EVEN CLOSE TO STOCK TRUCK! IF YOU ARE UNSURE ABOUT IF YOUR TRUCK IS READY FOR THE SSR, PLEASE GIVE US CALL BEFORE ORDERING!!!
|
MADS Electronics
Smarty SSR59
2003-07 Dodge Ram Cummins Diesel Truck
Key features:
- Race performance CaTCHER software inside
- More than 15 billions of possible tuning customizations
- Fastest download in the industry, up to three times faster than
the competition, a typical ECM update takes about 3.5 to 5
minutes, depending on the truck model.
- ABS tire height updates in just few seconds.
- Not traceable in the stock setting. Smarty leaves no footprint.
- Manual High Idle is enabled in all softwares
- Reads Diagnostic Trouble Codes in plain text.
- No tools required, no fuses to pull.
- USB built in for simple updates .
- Most complete keyboard in the industry.
- Reliable, it works off your OEM hardware.
- Programmable Speed Limiter from 25 to 250 mph
- RPM limiter up to 4200
- Power on Demand
- Ability to adjust low and high level timing, high and low level rail
pressure, high and low level duration and torque management to suit your
needs.
Smarty software updates are always free. As an added bonus, you can always send yours in and we can do it for you. Local guys can always bring theirs in for the free update. We will even help you program your truck!
Diesel Power Products logos are only for promotional purposes and not actually on the box or unit
Fast guide to Smarty SSR software levels
No need for a PC. No need to know about binary code. No need to spend countless hours on a complicated software.No need to become a software engineer to fine tune your truck!
The SSR delivers the right combination of performance parameters to fully customize your engine. No matter what modifications you have done to it! Whatever race and class you want to compete in, the SSR is the answer!
How it works
The SSR provides just one base performance software that takes care of all the limiting factors like the speed / RPM / Torque & boost limiters. Then you will need to fine tune the injection duration, injection timing & rail pressure to the truck's needs. The three most critical performance parameters in a Diesel engine! In order to allow the complete customization of the performance software to the particular engine's needs, the SSR provides 50 levels each for the following parameters:
1) Low Load injection Timing ( LLT )
2) High Load injection Timing ( HLT )
3) Low Load injection Duration ( LLD )
4) High Load injection duration ( HLD )
5) Low Load Rail Pressure ( LLRP )
6) High Load Rail Pressure ( HLRP )
All you need to do is to select the tuning parameters that match your truck best, voilà.
Power on Demand
100 power levels selectable in just one second during the driving!
It's easy: just type the preferred power level directly on Smarty keyboard, from 00 to 99. That's all!
For security reason, the truck waits that the throttle is released before applying the new power level.
No trace is left in the ECM!
I herby CLAIM that Smarty is the FIRST AND ONLY downloader that does not erase any of the stored data in the ECM. Smarty does NOT leave any electronic footprints in the ECM or any other electronic module in the truck. Smarty does NOT set ANY codes once the ECM is set back to stock. Smarty does NOT need to have fuses pulled.
No matter what the competition claims , in one way or another they're ALL detectable. Smarty is NOT!
Yet, Smarty can not do one thing for you. Fix what others have broken. Smarty can not restore a key on counter that another downloader has erased . Smarty can not fix VIN# troubles caused by other products. If your Check engine / ABS light is on because another product has screwed your ECM, Smarty can not fix it, the other guy HAS to...
ABS / Speedo recalibration
The tire height can be adjusted up to 44" in increments of 10 tenth of an inch in just a couple seconds. Of course, Smarty needs to be VIN# locked to the truck in order to get into the ABS adjustment section.
DTC Code reader
The name says it all.You can read and erase codes. Codes are displayed also in plain English. That's old news by now. Smarty S-03 was the first one to provide that utility, others found the idea to be a good one too. ( Smarty does erase ABS codes too but does not display them )
ECM update speed
Faster than anything else on the market! Again we've done our homework on the protocol. Less than 5 minutes. Three times faster than a Star-Scan diagnostic tool or competitor.
We have developed our own bootloader in order to not have to pull fuses should an update become interrupted for any reason. All you have to do is to turn the key off / key on Smarty does everything else on it's own.
Updates
The CaTCHER softwares as they are today are only a starting point. Expect major news in future. We’re for your feedback, opinions, likes, dislikes...We will make Smarty do what YOU want, TOGETHER.
SKU:ME-SSR59
|
|
|
Weight:3.00
|
Regular Price: $799.00
DPP Sale Price: $735.00 |
Quantity:
|
Product Rating:  (0.00) # of Ratings: 0 (Only registered customers can rate)
There are no comments for this product.
|
|