Fast and Free Shipping On Orders Over $100
No Salesmen, Just Enthusiasts 888.993.4373
The Edge Comp module maximizes engine efficiency by monitoring the RPM, timing, turbo boost pressure and fueling parameters of your Cummins engine. The Comp module uses this information to determine and control both fueling and timing enhancements for the Bosch fuel injection pump. Timing and fueling enhancements are controlled via CAN-BUS through the Data Link and by connecting directly into the Bosch fuel injection pump.
The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge Juice module. Power gains may vary based on vehicle and geographical location.
- Level 0: Stock
- Level 1: 40 Horsepower - 150 Foot Pounds of Torque
- Level 2: 60 Horsepower - 200 Foot Pounds of Torque
- Level 3: 80 Horsepower - 250 Foot Pounds of Torque
- Level 4: 100 Horsepower - 300 Foot Pounds of Torque
- Level 5: 120 Horsepower - 350 Foot Pounds of Torque
- Only the unit for 1998.5-2000 model years without Hot Unlock are CARB E.O. Certified.
NO VIDEOS AVAILABLE
- 0 Reviews
- 0 Questions
What type of connectors does it have? (round, [absolute circle], not oval or square ended oval) I have a RV that has this motor and have been having trouble locating a programmer that does NOT require splicing into the wires in effort to work. Any assistance in this matter would greatly be appreciated!?
We would recommend contacting Edge Products directly. As there is two mid model year splits for round vs square plug.
I have a 98.5 Cummins and I have a comp box with the hot unlock on it but the box is for 01-02. Is the only difference between the two the map sensor connectors? Or is the programming different for the different years from 98 to a 02 models??
I have talked to Edge before on that box. It is just the connectors that are different.
is there a different box for manuals and automatics?
There is no difference. Only years.
I have a 2002 Dodge Ram 3500 with a 5.9 24 valve cummins. It is completely Stock. Needing a little added power for towing. I have searched and searched and can't seem to find a chip or tuner. I believe my truck falls into the 1998.5-2002. Can I just plug this chip in and notice a difference or am I forced to buy all the screens and such? Really interested in this product.?
I would not run that Comp box without gauges. That is really aggressive tuning and can run hot and needs to be monitored.
Can you stack this on top of the Edge Juice/Attitude CTS2? If not, what can you stack on top of that programmer? Which one would be the best fit??
No, the tuner we would recommend to work in conjunction would only be the smarty.
I currently have this product on my 99 cummins. Can I stack the Edge cts2 on top of it??
02 24v here. Currently running the edge jwa cts 1. Is it possible to run this tuner but have the cts screen still monitor everything? Or would I have to switch everything over to gauges??
I'm confused, are you looking to upgrade to a different screen? If you have a CTS right now I would just keep that one.
will i see fuel economy improvements?
Yes you can. Depending on how you drive your truck. Also what power level you choose