SKU #: HAWK-HB513F.610 Hawk Performance HB513F.610 HPS Series Rear Brake Pad Set 14-18 Ram 1500

$101.69
Purchase Hawk Performance HB513F.610 HPS Series Rear Brake Pad Set 14-18 Ram 1500
    • 2014-2018 Ram 1500



Description

High Performance Street disc brake pads are world renowned for increasing stopping power on your Ram. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performanc ... read more

  • Share

Fast and Free Shipping On Orders Over $199

No Salesmen, Just Enthusiasts 888.993.4373

High Performance Street disc brake pads are world renowned for increasing stopping power on your Ram. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance's HPS braking compound.

This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.

The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you will have a highly durable brake pad with less brake dust.

All Hawk Performance High Performance Street brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer's workmanship and materials.

IMPORTANT NOTE: Hawk Performance burnishes its High Performance Street brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.

Specifications

  • SkuHAWK-HB513F.610
  • ManufacturerHawk Performance
  • MPNHB513F.610
KIT CONTENTS
  • (4) Brake Pads (2 Wheels)
FEATURES & BENEFITS:
  • Superior Stopping Power
  • OE Grade Noise Dampening System
  • Low Dust
  • Extended Pad and Rotor Life
  • Lifetime Warranty
  • Ferro-Carbon Disc Brake Pads
BED-IN INSTRUCTIONS
  • 1. After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
  • 2. Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.
  • 3. DO NOT DRAG BRAKES!
  • 4. Allow 15 minutes for brake system to cool down.
  • 5. After step 4 your new pads are ready for use.
  • NO VIDEOS AVAILABLE

    Blog Posts

    Recommended Products

    Recently Viewed

    Added To Cart

    Hawk Performance HB513F.610 HPS Series Rear Brake Pad Set 14-18 Ram 1500

    Hawk Performance HB513F.610 HPS Series Rear Brake Pad Set 14-18 Ram 1500

    Quantity: 0