ReadyLIFT OEM-style rear block kits for 2011-2016 Ford Super Duty. These Rear Block Kits include two (2) Rear Blocks, four (4) Long E-Coated U-Bolts, and eight (8) Nuts and Washers. For trucks with a two-piece driveshaft, the kit will also include one (1) Carrier Bearing Spacer. Based on OEM designs, these blocks have Integrated OEM-Style Bump Stops. ReadyLIFT Block Kits will put a slight rake back in your truck for hauling or towing and are designed to work with your ReadyLIFT Suspension Leveling Kit. In fact, these blocks are the ideal Tow Package upgrade not only for stock height vehicles but lifted or leveled trucks too! Like all ReadyLIFT products these block kits come with a Limited Lifetime Warranty.
Specifications
- ManufacturerReadyLIFT Suspension
- MPN66-2014 | 66-2015 | 66-2024 | 66-2025
WARNING: CANCER AND REPRODUCTIVE HARM www.P65Warnings.ca.gov
IMPORTANT NOTES:
- Fits 2wd or 4WD trucks
- The amount of additional lift depends on the size of the original factory block that is being replaced
- If the factory block is 2", and you install a 4" block, then you will gain 2" of lift above the factory block height
- Not intended for use with vehicles equipped with Service Axle
- The lift blocks in this kit are not designed to work with aftermarket or factory add-on air spring/load leveling kits that attach to the bump stop tangs
FEATURES & BENEFITS:
- Cast Iron OEM-equivalent
- Cast in center pins - no dangerous pressed in pins
- Built in pinion angle degree
- OEM Bump Stop Landings
- Tough E-coated finish
- New U-bolts and hardware
- The Perfect Solution for Towing and Hauling
- Adds a Slight Rake for improved weight distribution
- Installation Time About 1+ Hours
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Added To Cart
ReadyLIFT Rear Block Lift Kit 11-16 Ford F-250/F-350
Quantity: 0
Cart Total$0000.00