SKU #: DD-DIPSTICK ADAPTER REPAIR KIT Driven Diesel Dipstick Adapter Repair Kit 94-03 7.3L Ford Powerstroke

$299.95
Purchase Driven Diesel Dipstick Adapter Repair Kit 94-03 7.3L Ford Powerstroke
    • 1994-2003 7.3L Ford Powerstroke
  • Manufacturer Warranty: 3 Months



Description

As the 7.3L trucks get older, oil leaks start to rear their ugly head, and one of the most common sources is at the factory dipstick adapter in the side of the oil pan. Sure, some people will whip ou ... read more

  • Share

Fast and Free Shipping On Orders Over $199

No Salesmen, Just Enthusiasts 888.993.4373

As the 7.3L trucks get older, oil leaks start to rear their ugly head, and one of the most common sources is at the factory dipstick adapter in the side of the oil pan. Sure, some people will whip out the JBWeld and it might fix the issue temporarily, but this not a reliable solution to ensure it doesn't leak again.

Whether you've got an oil leak now, or you're building a new engine and don't want to deal with one in the future, this Dipstick Adapter Repair kit is the once and for all solution! This kit completely eliminates the stock dipstick adapter, replacing it with a new machined aluminum adapter that features a double o-ring seal on the OUTSIDE of the oil pan. This kit can be installed with the oil pan still on the engine, and the engine still in the truck. Best of all, if the o-rings in this kit should ever leak, this adapter can be quickly and easily removed and reinstalled with new o-rings...all from outside the oil pan!

Note: This product may require modification to fit engines using HYPERMAX connecting rods or using an AFTERMARKET Engine Girdle across the main caps. It has been used with both products, but clearances should be closely checked and installation may require additional steps.

Strictly Diesel Dipstick Repair Adapter Kit - FREQUENTLY ASKED QUESTIONS:

Q : Do I have to remove the engine and/or the oil pan to install this part?
A : No, this Dipstick Adapter installs from the OUTSIDE of the oil pan and does NOT require removal of the engine or the oil pan for installation or service.

Q : How do I get the factory part out of the oil pan when installing this Dipstick Adapter Repair Kit?
A : You don't. The interior portion of the factory dipstick adapter stays in the oil pan. During the installation, after removing the original o-ring (so it doesn't get stuck in the oil pickup and reduce oil flow), this part is dropped into the lowest part of the oil pan sump, where it will remain until such time as the engine and oil pan are removed.

Q : Can the factory part that is left in the oil pan cause any engine damage?
A : No. The factory dipstick adapter will sink to the bottom of the pan and have nowhere to go. It is too large to enter the oil pickup tube and there is nothing else in the bottom of the oil pan for it to interfere with. The only possibility for any issues with regard to the part in the bottom of the oil pan would be in the case of the engine being operated upside down (a situation that more than likely means that you've got bigger problems than whether the engine continues to run or not).

Q : How does the Dipstick Adapter Repair Kit work?
A : This Dipstick Adapter has a rear support brace (not shown in the above photo) that goes in through the opening of the oil pan and is swiveled into place during the installation. The 2 screws visible in the photograph above are used to retain that support brace and pull it tight against the interior wall of the oil pan, which compresses the 2 o-rings against the outside wall of the oil pan and creates the seal.

Q : Is there any drilling or modification to the oil pan required?
A : No, there is absolutely no modification to the factory oil pan required to install this Dipstick Adapter.

Q : Does this product include installation instructions?
A : Yes. The kit comes complete with a new Ford O-Ring and a set of Detailed Full Color Installation Instructions that show how to install the product into both an "OBS" (94-97) and "Super Duty" (99-03) style truck.

Specifications

  • SkuDD-DIPSTICK ADAPTER REPAIR KIT
  • ManufacturerDriven Diesel
  • MPNDD-73L-Dipstick
Kit Contents:
  • Metzfab Dipstick Adapter
  • Machined Aluminum Dipstick Adapter (instead of cheap pot metal)
  • Machined Steel Backing Plate/Brace
  • Stainless Steel Screws with Copper Sealing Washers
  • Double O-Ring Set for a Positive Seal
  • Correct New Ford Dipstick O-Ring
  • Detailed Full Color Installation Instructions
Features & Benefits:
  • Installs Quickly Without Oil Pan or Engine Removal
  • Quickly and Easily Serviced If Necessary
  • Fits 94-97 "OBS" Trucks, 99-03 Super Duty Trucks Excursions and E-Series Vans
  • Patent Pending

Videos

Blog Posts

Recommended Products

Recently Viewed

Added To Cart

Driven Diesel Dipstick Adapter Repair Kit 94-03 7.3L Ford Powerstroke

Driven Diesel Dipstick Adapter Repair Kit 94-03 7.3L Ford Powerstroke

Quantity: 0