Fast and Free Shipping On Orders Over $100
No Salesmen, Just Enthusiasts 888.993.4373
Nearly every Duramax has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing of suspension components. On top of these issues anytime the wheel hops, it is not touching the pavement. If it is not touching the pavement, you're not getting traction!
Longhorn Fab Shop has created a simple, cost effective solution to the problem. These traction bars are affordable enough for the daily driver truck, yet strong enough for dedicated sled pullers and drag racers. Whether you drive your truck to watch the competition, or trailer it in because you ARE the competition, you'll love the strength, design, adjustability, and ease of installation.
KIT VARIATIONS: For owners of short bed vehicles, the bars measure out to 72" center hole to center hole, where long box owners will receive 86" bars. In order to be able to tailor these traction bars to nearly every driver and vehicle, Longhorn offers their brackets, as well as the rod ends in several variations. For trucks that are daily drivers, tow vehicles, and really don't see a lot of abuse, we recommend going with their standard series brackets and standard grade rod ends. But for those that either simply demand the best, or are hard on the trucks through aggressive takeoffs, sled pulling, etc. we recommend upgrading to the Professional Grade Brackets and Hot Street Rod Ends. And you can also mix and match depending on your particular preferences. If you're not sure which kit is right for you, just give us a call or shoot an e-mail our way, and we would be happy to steer you in the right direction.
- ManufacturerLonghorn Fab Shop
- MPN200901-SB | 200901-LB
- Massive 2" steel bars are HEAVY DUTY.
- 6' length provides perfect functionality and looks.
- NO welding required.
- Installs with simple hand tools.
- All Grade 8 hardware.
- All brackets are laser cut and CNC bent to guarantee a perfect fit every time.
- Turnbuckle design allows for easy alignment of heim joints and brackets.
- Completely adjustable for suspension preloading without removing the bars.
- MANUFACTURED IN THE USA!
NO VIDEOS AVAILABLE
- 0 Reviews
- 0 Questions
Would these fit a 2003 silverado 1500hd gasser??
These are only designed for the 2500/3500 applications. However with fabrication im sure they could be adapted.
Will these fit a 2010 silverado 2500, regular cab long box?
Do these bars come with the required bolts for installation or are they sold separately??
Those should come with all the grade 8 hardware needed for install.
Hello will these directly fit a 2002 silverado 2500hd with 8.1l gas engine?
There should be no issues with fitment on that application no
How will these affect ride quality??
They will transfer a little more shock into the frame. If your truck is stock hardly any effect at all. If it is lifted you may experience a little more.