SKU #: ZON-D25N-Main Zone Offroad 8" Suspension System 03-07 Ram 5.9L Cummins 2500 / 3500

$1,216.75
Purchase Zone Offroad 8" Suspension System 03-07 Ram 5.9L Cummins 2500 / 3500
    • 2003-2007 Dodge 5.9L Cummins 2500 / 3500 4x4
  • Add a Pair of Front Shocks?
    Add a Pair of Rear Shocks?



Description

Bring your Ram to new heights with this massive 8" suspension system from Zone! This Zone Offroad 8" suspension system is performance packed and budget friendly for those looking to get 38" tires unde ... read more

  • Share

Fast and Free Shipping On Orders Over $199

No Salesmen, Just Enthusiasts 888.993.4373

Bring your Ram to new heights with this massive 8" suspension system from Zone! This Zone Offroad 8" suspension system is performance packed and budget friendly for those looking to get 38" tires under their HD Dodge truck. The lift uses a unique control arm relocation design. Both the stock upper and lower arms are relocated to relieve angles, properly position the front axle and provide good caster and front pinion angle settings. The 1/4" steel constructed relocation brackets mount directly to stock locations and only require a few new holes to be drilled for extra support. No cutting of the frame or axle mounts is required. Stock alignment adjustability is retained. Stock control arm angles are maintained to provide a great ride, handling and control.

In addition to the control arm brackets, all the necessary additional components are included. Full-length coil springs, dropped pitman arm, track bar relocation, sway bar relocation and bump stops are included. The rear kits feature new lift blocks and u-bolts. A rear carrier bearing drop kit is available also for trucks featuring a stock 2-piece rear driveshaft.

Shock Options:

  • No Shocks: If you'd rather supply your own shocks, no problem, we give you this option.
  • Fox Adventure Series Shocks: Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged gas chamber, preventing oil aeration for fade-free performance in rough terrain.


Specifications

  • ManufacturerZone Offroad Suspension
  • MPND24N | D25N
Featured Technology Benefits
  • Unique upper and lower control arm relocation bracket design.
  • Heavy 1/4" steel construction.
  • No cutting of the frame required.
  • High performance at a low price.
Important Notes
  • 2-piece rear driveshaft requires carrier bearing drop kit D5505.
  • Will not fit dually applications
  • Rear axle diameter will be 3.5" or 4", measure before ordering
  • Minor trimming may be required with some tire/wheel combinations. A front bumper spacer kit (D5801) is available to gain clearance if necessary
  • Depending on the factory transmission mount, in rare cases some 8" kits may not require the transfer case indexing kit. See installation instructions for details.
  • Lift springs are designed for diesel models only.
  • Please confirm rear axle size before ordering. Typically, the 3-1/2" axle diameter was only found on the earlier models in 2003 and 2004, where the 4-1/8" were found on the later trucks. Please measure your axle to confirm.
Quick Specs
  • Front Lift Height: 8"
  • Front Lift Method: Coil Springs
  • Rear Lift Height: 5"
  • Rear Lift Method: Block Kit
  • Install Time Hrs: 6-8
  • Difficulty Level 1-5: 3
  • Wheel Size: 17 X 9
  • Back Spacing: 4.5-5"
  • Max Tire Size: 38 X 13.50

NO VIDEOS AVAILABLE

Blog Posts

Recommended Products

Recently Viewed

Added To Cart

Zone Offroad 8

Zone Offroad 8" Suspension System 03-07 Ram 5.9L Cummins 2500 / 3500

Quantity: 0