Enjoy free shipping on all orders over $100 *

SKU #: AFE-46-20034-B AFE 46-20034-B BladeRunner Intercooler Tubes Combo 07.5-09 6.7L Dodge Cummins

Purchase AFE 46-20034-B BladeRunner Intercooler Tubes Combo 07.5-09 6.7L Dodge Cummins
    • 2007.5-2009 6.7L Dodge Ram Cummins

Description

Gain power and efficiency, while lowering your EGT's (Exhaust Gas Temperatures) with an AEM water-meth kit! THE AEM DIESEL WATER/METHANOL INJECTION SYSTEM ADVANTAGE - Water/methanol injection (WMI) s ... read more

  • Share

Fast and Free Shipping On Orders Over $100

No Salesmen, Just Enthusiasts 888.993.4373

Gain power and efficiency, while lowering your EGT's (Exhaust Gas Temperatures) with an AEM water-meth kit!

THE AEM DIESEL WATER/METHANOL INJECTION SYSTEM ADVANTAGE - Water/methanol injection (WMI) systems reduce air inlet temps and enhance combustion efficiency on turbo Diesel applications, which allows an engine to deliver more power with less effort. Water/methanol injection also offers a host of benefits that promote engine longevity, including the reduction of carbon deposits left by a Diesel's exhaust gas recirculation (EGR) system. AEM's Water/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol injection system.

Water/Methanol for Diesels of all Boost Levels - AEM Electronics offers two different water/methanol controller designs for HD and Diesel trucks:

Robust, Easy to Use Controllers - The new HD controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the HD controller housings for mating to the redesigned wiring harness's positive-lock connector. The Boost Dependent HD controller housing (PN 30-3301 w/ 5 gallon tank, PN 30-3303 full kit without tank) has a molded-in, barbed nipple to accept a boost hose (up to 40 PSI) and a wiring legend on the back. The Multi-Input controller (PN 30-3351 w/ 5 gallon tank, PN 30-3352 full kit without tank) has an easy-to-remove plug covering the programming dipswitches and a programming legend on the back for the 0-5v and frequency based settings. Both controller housings feature an easy to access integrated fuse and molded mounting tabs.

Simplified Wiring - The wiring harnesses for AEM's Water/Methanol Injection kits are terminated with a positive-lock connector on one end and have color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive.

Integrated Boost Safe Feature - The controllers for AEM's Water Methanol systems include an integrated Boost Safe output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error (short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.), allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system. Combined with the integral and highly accurate conductive low-fluid switch in the tank, Boost Safe can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water/Methanol Injection Systems.

Heavy-Duty High Pressure Injection Pump - AEM's internally-bypassed water/methanol injection pump does not cycle on and off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.

Low-Profile 5 Gallon Tank - AEM's Diesel Water/Meth systems are available with or without a low-profile 5 gallon tank. The 5 Gallon tank includes a high-tech conductive low fluid level indicator with a positive lock connector and color matched wires to the wiring harness, and baffles to reduce fluid slosh.

Machined Billet Injectors and Nozzles - AEM includes two precision-machined billet injectors in its Diesel Water/Methanol Injection kits that feature an integral check valve to prevent unintended fluid flow. Three billet injector nozzles are included for matching water/methanol flow to an engine's horsepower output (see chart below).

Revised Flow Control Strategy for More Linear Fluid Delivery - AEM's engineers spent extensive time revamping the HD water/methanol controller's flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine's need for water/methanol injection, which further improves charge air cooling and reduces EGTs.

WATER/METHANOL INJECTION ADVANTAGES FOR DIESEL ENGINES:
Reduces Air Inlet Charge Temps - Water/methanol's liquid intercooling effect on turbo Diesel engines can reduce air charge temps by as much as 100 degrees, and deliver a more oxygen-rich air charge.

Enhances Combustion Efficiency - In addition to cooling air inlet temps, as the water absorbs heat in the combustion chamber and converts to steam, the steam's expansion rate increases the mean effective cylinder pressure without causing dangerous pressure spikes. This effective increase in cylinder pressure combined with methanol's promotion of complete combustion allows your Diesel engine to burn fuel more completely. When fuel is being burned more completely less is wasted, which can increase fuel economy.

REDUCES EXHAUST GAS TEMPERATURES (EGTs) - Because Diesel vehicles using water/methanol injection burn fuel more completely, less un-burnt fuel is present in the exhaust manifold where it can flash ignite to increase EGTs and create particulate matter (soot). Water/methanol injection eliminates this secondary combustion of raw fuel in the exhaust manifold to reduce EGTs by up to 250 degrees, and reduces harmful particulates to extend engine life (and that expensive particulate filter).

Specifications

  • SkuAFE-46-20034-B
  • ManufacturerAFE
  • MPN46-20034-B

NO VIDEOS AVAILABLE

Blog Posts

Recommended Products

Expect an answer within the next 48 hours

  • 0 Reviews
  • 0 Questions
No Reviews Yet! Be the first one.
Rate Product

No questions have been asked. Be the first one!

Added To Cart

AFE 46-20034-B BladeRunner Intercooler Tubes Combo 07.5-09 6.7L Dodge Cummins

AFE 46-20034-B BladeRunner Intercooler Tubes Combo 07.5-09 6.7L Dodge Cummins

Quantity: 0

Compatible Products