SKU #: FPE-DPK-67-0709-main Fleece Performance Dual CP3 Pump Kit Without Pump 07.5-09 Ram 6.7L Cummins

$999.00
Purchase Fleece Performance Dual CP3 Pump Kit Without Pump 07.5-09 Ram 6.7L Cummins
    • 2007.5-2009 Ram 6.7L Cummins
  • Manufacturer Warranty: 12 Months



Description

This kit comes complete, but without the necessary secondary CP3 injection pump for those that wish to source their own. Its been proven time and again that the stock CP3 injection pump does not prov ... read more

  • Share

Fast and Free Shipping On Orders Over $199

No Salesmen, Just Enthusiasts 888.993.4373

This kit comes complete, but without the necessary secondary CP3 injection pump for those that wish to source their own.

Its been proven time and again that the stock CP3 injection pump does not provide satisfactory fuel supply, both in terms of volume as well as pressure, for high performance engines. But what many don't know, is that even in moderately stock engines, the stock pump is over tasked. While some take the route of an upgraded single pump, many are looking towards dual pumps because they lessen the burden on the single pump, meaning it will run longer and more consistently over time. This will deliver better overall performance, allowing the injectors to run at their optimum whether you're daily driving, towing, or even racing.

When building this kit, Fleece set out to create the cleanest and simplest to install system on the market. No complex brackets, no failure prone pump controller, just a straight forward installation that delivers the performance your Cummins engine is after.

FUEL DISTRIBUTION BLOCK / HOSE & FITTING KIT: Add Fleece's own Fuel Distribution Block and Hose and Fitting Kit for a clean installation. So now, what the heck is a Fuel Distribution Block and why do you need it? If you have an aftermarket fuel filtration system such as an Air Dog or a FASS and dual CP3 pumps, the fuel distribution block will allow you to get rid of your unnecessary factory fuel filter and give you a convenient and clean location to route your feeds, returns, and sensors. It mounts in the factory fuel filter location to allow you to use your factory return lines without any relocating or bending. It also features a port for the factory WIF (water in fuel) sensor, a 9/16-18 o-ring port (dual CP3 return port), (3) 3/4-16 o-ring ports (feed ports), and (2) 1/8" NPT ports (sensor ports). For those who already have the Fleece Fuel Distribution Block, you can just simply purchase the Hose & Fitting Kit by itself to properly route the fuel lines to your secondary pump. If your truck is not equipped with an auxiliary fuel filter, such as that found on a FASS or AirDog system, you must also purchase Fleece Auxiliary Fuel Filter and Line Kit.

IMPORTANT NOTE:
  • For proper clearance and fitment, modification to the factory air intake horn may be required based on your specific configuration.  Aftermarket intake horns generally provide greater clearance and may not require modifications to allow for proper fitment of this kit.
no shipping No Shipping To CA

Specifications

  • ManufacturerFleece Performance Engineering
  • MPNFPE-DPK-67-79-NP | FPE-DPK-67-79-NP-BL | FPE-DPK-67-79-NP-OG | FPE-DPK-67-79-NP-RD
WARNING: CANCER AND REPRODUCTIVE HARM www.P65Warnings.ca.gov Cancer and reproductive harm
KIT CONTENTS:
  • Cummins Common Rail Dual CP3 Bracket
  • 10-12 Cummins Heavy Duty Dual Pump Belt
  • Dual Pump Pulley - Idler
  • Cummins Dual Pump Idler Pulley Spacer
  • Cummins Dual Pump Pulley
  • (6) M8x1.25 Flange Nuts
  • (6) M8x1.25x50 Carriage Bolts
  • M10x1.5x40mm Flange Head Cap Screw
  • M8 x 1.25 Flange Head Cap Screw
  • (2) M6x1.0x12 Flange Head Cap Screw
  • M18x1.5 CP3 Nut Upper Radiator Hose
  • Cummins Dual Pump Controller

NO VIDEOS AVAILABLE

Blog Posts

Recommended Products

Recently Viewed

Added To Cart

Fleece Performance Dual CP3 Pump Kit Without Pump 07.5-09 Ram 6.7L Cummins

Fleece Performance Dual CP3 Pump Kit Without Pump 07.5-09 Ram 6.7L Cummins

Quantity: 0