If you want big power, it means you're going to need a big turbo, and none better than this S471 complete turbo kit from Industrial. This kit comes complete with everything to install a high performing, high flowing S471 charger square in the center of the engine, just like a 2nd Gen Cummins, to equalize cylinder distribution for maximum performance.
The factory turbo found on the 03-07 Cummins is capable of supporting sub-450 horsepower levels. Above this point, it is being oversped that will result in failure, as well as the fact it simply cannot supply enough air to support horsepower levels above this point. Further, the placement of the factory turbo is not positioned in an ideal position as its centered on cylinders four and five as opposed to three and four, resulting in the front cylinders running hotter than the rear.
So, what's the fix? Easy, this turbo and installation kit from Industrial Injection to improve airflow and square the turbo on the engine!
And now, lets talk about the turbo. Industrial Injection has done a LOT of research on turbo sizing. This particular S471 on a 5.9L will work best when used in conjunction with custom tuning and a larger set of injectors for power levels above 700 rear wheel horsepower to deliver maximum street and track performance.
Turbo Options
The standard turbo kit will utilize a 1.10 A/R exhaust housing which is great for maximum boost levels and low drive pressure. However, if you're running minimal injector size (around 100), oversized tires, 3.42 or 3.73 gears, etc., you would be better suited to run a smaller A/R ratio, such as a 0.90, to actually increase drive pressure to assist in turbo spool. But if you're somewhere in the middle, say running 150 horsepower injectors, 35" tires, 3.73 gears, and daily drive the truck, you may be best suited for the 1.00 A/R housing.
Turbo Dimensions:
No Shipping To CA
The factory turbo found on the 03-07 Cummins is capable of supporting sub-450 horsepower levels. Above this point, it is being oversped that will result in failure, as well as the fact it simply cannot supply enough air to support horsepower levels above this point. Further, the placement of the factory turbo is not positioned in an ideal position as its centered on cylinders four and five as opposed to three and four, resulting in the front cylinders running hotter than the rear.
So, what's the fix? Easy, this turbo and installation kit from Industrial Injection to improve airflow and square the turbo on the engine!
And now, lets talk about the turbo. Industrial Injection has done a LOT of research on turbo sizing. This particular S471 on a 5.9L will work best when used in conjunction with custom tuning and a larger set of injectors for power levels above 700 rear wheel horsepower to deliver maximum street and track performance.
Turbo Options
The standard turbo kit will utilize a 1.10 A/R exhaust housing which is great for maximum boost levels and low drive pressure. However, if you're running minimal injector size (around 100), oversized tires, 3.42 or 3.73 gears, etc., you would be better suited to run a smaller A/R ratio, such as a 0.90, to actually increase drive pressure to assist in turbo spool. But if you're somewhere in the middle, say running 150 horsepower injectors, 35" tires, 3.73 gears, and daily drive the truck, you may be best suited for the 1.00 A/R housing.
Turbo Dimensions:
- 71mm Compressor Wheel
- 83/74mm Turbine Wheel
- 0.90, 1.0, 1.10 T4 Turbine Housing Options
- 90lbs / min of Airflow
No Shipping To CA
Specifications
- ManufacturerIndustrial Injection
- MPN227423 | 227424 | 227425
WARNING: CANCER AND REPRODUCTIVE HARM
www.P65Warnings.ca.gov
Features and Options:
- Street / Track Performance
- Lower EGT's
- V-Banded Race Cover
- Complete Installation Kit
- Custom S&B Designed Cold Air Intake
- Injector Upgrades Required
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Added To Cart
Industrial Injection S471 2nd Gen Turbo Kit 03-07 Dodge 5.9L Cummins
Quantity: 0
Cart Total$0000.00