SKU #: ZON-F25 Zone Offroad 4" Radius Arm Suspension System 11-16 Ford 6.7L Powerstroke

$935.70
Purchase Zone Offroad 4" Radius Arm Suspension System 11-16 Ford 6.7L Powerstroke
    • 2011-2016 Ford F-250 / F-350 SuperDuty 4x4
  • Is Your Truck Equipped with Factory Overload Springs?
    Add a Pair of Front Shocks?
    Add a Pair of Rear Shocks?



Description

Bring your SuperDuty to new heights with this complete suspension system from Zone! This lift kit delivers so much more than cheap alternatives such as fully boxed, replacement radius arms and progre ... read more

  • Share

Fast and Free Shipping On Orders Over $199

No Salesmen, Just Enthusiasts 888.993.4373

Bring your SuperDuty to new heights with this complete suspension system from Zone! This lift kit delivers so much more than cheap alternatives such as fully boxed, replacement radius arms and progressive rate coil springs, but at a price point that you can't pass up.

This radius arm suspension lift features tough replacement radius arms that are considerably stronger than their stock counterparts, made of 1/4" steel, fully boxed steel, and utilizing large 2-1/2", greasable urethane bushings. The arms bolt directly into the stock location, and position the axle for the proper caster and wheel location. The lower mount point at the axle utilizes Zone's popular cam lock design, making it adjustable for 4" or 6" of lift.

Engine specific front coil springs are designed to not only ride great, but will hold up over the long haul. A 1-1/2" solid steel track bar is included to properly center the axle after lifting. This track bar features new oversized, high-durometer (hardness) urethane bushings for long term performance and improved handling. 

The rear is lifted with a 5" block used to replace the factory block instead of stacking blocks. This system is also one of the easiest installations on the market because of the use of a front track bar and rear block kit. If you are looking to not only lift your Super Duty, but improve the looks, strength, and feel of your suspension, choose the Zone Offroad radius arm system.

Specifications

  • SkuZON-F25
  • ManufacturerZone Offroad Suspension
  • MPNF25N | F26N
FEATURES & BENEFITS:
  • Front coil springs offering off-road performance and great ride qualtiy that will not sag.
  • 1/4" boxed steel radius arms, utilizing 2 1/2" greasable urethane bushings.
  • 1-1/2" Solid steel track bar featuring specifically engineered bushings.
  • Yellow zinc plated rear u-bolts with high nuts hardened washers.
  • Rear 5" block kit to eliminate the factory block - NO stacking blocks!
QUICK SPECS:
  • Front Lift Height: 4"
  • Front Lift Method: Radius Arm System with Replacement Coil Springs
  • Rear Lift Height: 3"
  • Rear Lift Method: Block Kit
  • Install Time Hrs: 6 hrs
  • Difficulty Level 1-5: 2
  • Wheel Size: 17 X 9
  • Back Spacing: 4.5"³
  • Max Tire Size: 35 X 12.50
IMPORTANT NOTES:
  • Removal of the factory rear block is required. Net rear height gain will vary based on size of the factory block, but will typically result in a level stance.
  • If equipped with a 2-piece rear drive shaft, then a driveshaft alignment kit may be required. It is available in the optional accessories (part #F5401).
  • Rear box kit not designed for dually models.
  • Front exhaust modification may be required to clear the front driveshaft on gas models.
  • Although extremely rare, front and/or rear drive line vibration may occur.

NO VIDEOS AVAILABLE

Blog Posts

Recommended Products

Recently Viewed

Added To Cart

Zone Offroad 4

Zone Offroad 4" Radius Arm Suspension System 11-16 Ford 6.7L Powerstroke

Quantity: 0