SKU #: CS-DLEVEL-94 Carli Suspension Front Leveling Kit 94-02 Dodge Ram 5.9L Cummins

$830.00
Purchase Carli Suspension Front Leveling Kit 94-02 Dodge Ram 5.9L Cummins
    • 1994-2002 Dodge Ram 5.9L Cummins 4x4
  • Sway Bar Options



Description

Utilizing Carli's multi-rate coil springs that add 3 inches of ride height to the front of your Dodge Ram and custom Carli Signature Series shock absorbers plus options for your sway bar, this kit is ... read more

  • Share

Fast and Free Shipping On Orders Over $199

No Salesmen, Just Enthusiasts 888.993.4373

Utilizing Carli's multi-rate coil springs that add 3 inches of ride height to the front of your Dodge Ram and custom Carli Signature Series shock absorbers plus options for your sway bar, this kit is SO much more than your traditional "leveling kit."

The Leveling System was designed for people seeking a leveled vehicle with more performance and ride quality than a generic spacer lift. The Carli Signature Series front shocks have been custom tuned, in-house by Carli, for superior ride quality.

CARLI SIGNATURE SERIES SHOCKS

Your truck will sit 2.5"-3" higher in the front with 50% more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. The included, front, Carli Signature Series Shocks are longer to accommodate the extended travel. When designing the shocks, Zinc plating, Clear Coat for corrosion resistance and quality bushings were a must; finished off with boots to protect the shafts, Carli backs them with a limited lifetime warranty to ensure their quality is as unbeatable as their ride quality at this price point.

SWAY BAR OPTIONS

When pairing added down-travel with the taller ride height, the position of the factory sway bar will need to be altered as well. For this, you can choose to include extended, Sway Bar End Links. The End links are equipped with 1/2" FK Rod-Ends and in-house machined 17-4 stainless bodies that are extended over stock to reset the sway bar engagement point. Factory pillow bushings are re-used to assemble the sway bar to the lengthened link.

1994-1998 RAM 2500 / 3500 SWAY BAR  END LINKS SPECIFICATIONS:
  • Machined out of 17-4 Stainless Steel
  • FK Bearing, Chromoly Rod-End
1998.5-2009 RAM 2500 / 3500 SWAY BAR  END LINKS SPECIFICATIONS:
  • In-house machined 17-4 Stainless Steel
  • 1/2" FK Chromoly Rod-End

ADJUSTABLE TRACK BAR RECOMMENDED

When lifting the front end of a straight axle truck, the front axle is pulled off-center unless the proper linkages are addressed. Three inches of front lift equates to an axle shifted toward the driver's side 3/4" and back toward the cab 1/2". Although this is perfectly operable, we recommend the purchase of an adjustable track bar and relocation bracket to shift the axle back toward the passenger side and provide a stronger link with less deflection for the lifted application, and a set of extended control arms to shift the axle forward to its new center of travel.

IMPORTANT NOTES:
  • WHEELS: Carli Recommends a 17"-18" Wheel, no more than 9" wide with 5.75" of Backspacing on Leveling Systems
  • TIRES 35", E-Rated Tire Fitment is Recommended. Recommended unloaded Tire Pressure 45F/40R
  • RECOMMENDED CONFIGURATION: Carli Leveling Systems are Designed and Tested on Vehicles with 17"-18" Wheels with 37", E-Rated Tires. Stock wheels and tires or running a larger wheel diameter will result in a stiffer ride.
WHEEL AND TIRE NOTES:
  • This system will fit up to a 35" tire with stock control arms (we recommend purchasing our extended, Mild Steel Control Arms) on wheels with 5.75-6" of backspacing.
  • If running factory wheels, we recommend an All Terrain 35" tire to avoid rubbing. 
  • For 37" tire fitment, our High-Clearance Control Arms and Adjustable Track Bar can be paired to a wheel with 5.75" of Backspacing.
  • The more rubber, the better the small bump compliance will be at proper inflation pressures.
  • The ride will firm up as you go larger in wheel diameter.

Specifications

  • SkuCS-DLEVEL-94
  • ManufacturerCarli Suspension
  • MPNCS-DLEVEL-94
WARNING: CANCER AND REPRODUCTIVE HARM www.P65Warnings.ca.gov
KIT CONTENTS:
  • Multi-Rate Coil Springs
  • Carli Signature Series Front Shocks
  • Extended Sway Bar End Links
QUICK SPECS:
  • Shock Diameter 2.0"
  • Front Lift Height 3"
  • Rear Lift Height 0"
  • Tire Size Up to 35"
  • Front Travel 10"
  • Rear Travel Stock
KEY FEATURES:
  • Improved Handling
  • Level Stance

NO VIDEOS AVAILABLE

Blog Posts

Recommended Products

Recently Viewed

Added To Cart

Carli Suspension Front Leveling Kit 94-02 Dodge Ram 5.9L Cummins

Carli Suspension Front Leveling Kit 94-02 Dodge Ram 5.9L Cummins

Quantity: 0