The AirDog II-5G is an all in one premium fuel pump and filtration system for your 2019+ Cummins diesel. This system removes water, particulates, and entrained air from the diesel fuel. The entrained air that is separated from the fuel is returned to the tank through a small return fitting. The fuel is delivered to the engine at the correct pressure and flow rate to meet the demands of the engine under all operating conditions.
The AirDogII-5G DF-100 systems feature a built in adjustible diaphragm pressure regulator. All AirDog II-5G systems include a complete installation kit. The AirDog II-5G, for this particular application, is preset at 17 psi from the factory for a stock application. The regulator is adjustible up to 55 PSI so you can fine tune the system to perfectly match up to your current and future performance upgrades.
HOW IT WORKS:
The AirDog II-5G DF-100 draws fuel through a 5/8” suction line to reduce the risk of cavitation at the pump. The fuel is then drawn through the water separator where 92% of water is removed per SAE spec 1488. It is then pressurized through a Gerotor pump and sent to the 2 micron fuel filter before it is sent to the injection pump. The air from aerated fuel, due to tank sloshing and engine return lines, is separated and sent back to the tank through the 3/8” return fitting. The excess fuel that the engine does not use is recirculated through the diaphragm regulator back to the suction side of the pump. 
California Air Resource Board D-595-5 Specifications
- SkuPF-A7SABD427
- ManufacturerAirDog | PureFlow Technologies
- MPNA7SABD427
MANUFACTURING:
- PureFlow AirDog products are manufactured in Shelbyville Indiana by a team of skilled workers with unsurpassed attention to detail and using the most stringent quality assurance.
KIT CONTENTS:
- (1) AirDog II-5G DF-165
- (1) AirDog II Bracket
- (1) Mounting Hardware Kit
- (1) Frame Bracket
- (1) Wiring Harness
- (1) Bundle of Plastic Ties
- (1) 5/8” High Flow Suction Tube
- (1) Spacer
- (1) 14ft of Fuel Line
- (1) 7ft of 5/8” Fuel Line
- (1) 1/2” Straight Hose Quick Connect Fitting
- (1) 1/2" 90 Degree Hose Quick Connect Fitting
- (1) 3/8” 90 Degree Hose Quick Connect Fitting
- (1) 12mm X 1/2” male SAE J2044 Fitting
- (1) Sealing Washer (installs on WAP102 fitting)
- (1) 1/2” Male J2004 Quick Connect x 3/4-16” UNF
- (1) 3/8” Male J2004 Quick Connect x 7/16” UNF
- (2) 3/4-16 ORB Male to -10 JIC Female Fitting
- (2) -10 JIC Male to 5/8” Barb
- (1) Customer Service Oring Replacement Kit
FEATURES & BENEFITS:
- Supports moderate to high horsepower levels
- Flows 165 Gallons Per Hour
- Preset at 17 PSI
- Variable fuel pressure
- 3/4-16 o-ring boss (-8) inlet and outlet ports
- 7/16-20 ORB return port (-4)
- 4 bearing design with intermediate shaft to reduce pump noise and increase reliability
- Low flow fuel return to reduce aeration in the tank
- Demand Flow: only feeds as much fuel as what the engine needs
- Dual feed that feeds fuel to both sides of the Gerotor Pump to decrease cavitation
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Added To Cart
Airdog II-5G 165 GPH Air Fuel Separation Lift Pump System 19-23 Ram 6.7L Cummins
Quantity: 0
Cart Total$0000.00