Fast and Free Shipping On Orders Over $100
No Salesmen, Just Enthusiasts 888.993.4373
Your stock Cummins manifold pushes air from one outlet across 6 cylinders, creating a very inefficient flow of boosted air to your engine. This design flaw limits the air to your 1st, 2nd, and 6th cylinders which in turn means hotter cylinders and more wear-and-tear on your engine. Not to mention much less power. Thankfully Banks Power has solved this problem with their TwinRam system. A split manifold that evenly distributes boosted air to all of your cylinders, doubling the inlet area and optimizing your engine's functionality. Not only will you feel more power from your Cummins, but you'll also notice better gas mileage and reduced emissions.
- ManufacturerBanks Power
- Cast intake manifold design doubles stock inlet area
- Increases and balances boost-air distribution into all six cylinders
- Eliminates internal hot spots
- Enhances power, mileage and durability
- Reduces emissions
- 5-year Warranty
NO VIDEOS AVAILABLE
- 0 Reviews
- 0 Questions
Do you have to move the fuel filter and what if you want to use the grid heater Also are there any other changes that have to be made?
We offer the fuel filter relocation bracket on the same page under the additional options. You would need this in order to install this kit. Lastly the grid heater can be retained or blocked off with the provided part in this kit.
What size is the tubing up to and after the split??
The intercooler piping up to it is factory size. The split is cast aluminum, don't have the internal dimensions for that unfortunately.
What would you have to do to your fuel lines to make them fit?
There is a bracket that moves then slightly but other then that shouldn't be any line mods needed.
Will this work on a 24 valve?
No, as listed on the product, this is for the 94-98 12V engines only.
Is there any reason this intake setup could not be used on a 90 5.9 with a intercooler installed ,larger turbo and aftermarket lift pump and filters that have been relocated to the frame?
The injection lines are not going to be routed correctly to clear the twin ram. That would not work on that application.
What do you do about grid heater??
The kit will come with provisions to install one or add a total of two grid heaters. Or you can run none! -Ben
would this work on a 01 24v with a p pump swap??
If you are transferring the intake plenum from the 12V to the 24V it may fit, however, there is no guarantee with that. You may need to contact Banks directly about this. -Ben
Will this unit fit on a 1996 truck with a vacuum boost brake system??
Yes it would work with that application just fine. -Sands