Flowed turbine housings for low and high rpm boost control to match your engine for maximum air control. The 1989/90 5.9 6BTA Cummins came with an 18 cubic centimeter housing which can be pretty hard to spool. The turbo lag can be eliminated by going to the BD 16 cubic centimeter housing. The 91-93 engines have a 20 square centimeter housing and turbo lag is quite obvious. By installing the non-wastegated 16 square centimeter housing, higher boost pressure coupled with our larger injectors can pump the engine up to a 210 hp engine with 22 pounds of boost pressure.
No Shipping To CA
Specifications
- SkuBD-1045911
- ManufacturerBD-Power
- MPN1045911
WARNING: CANCER AND REPRODUCTIVE HARM www.P65Warnings.ca.gov
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
- 0 Reviews
- 0 Questions
A
aaron 5/27/11
Good power for the price throttle response is...
Good power for the price throttle response is like night and day only took 2 hrs to install
J
jeff 2/05/14
I have 350 dually 2 wheel drive with a big fu...
I have 350 dually 2 wheel drive with a big fuel pin 3200rpm spring stage 1 injectors cold air intake and a 4 inch exhaust. This was the final piece of the puzzle, woke my old truck up definitely worth the money.
M
Michael Verified Buyer 3/17/18
Good Quality Component
Replaced my 18CM housing with the BD 16CM unit for a modest improvement. The quality of the casting and the machining was first rate. I did have one small issue when installing the housing, and that was a tool clearance issue with (2) of the (4) nuts. The clearance space between the Fastener and the Casting was not adequate to get a standard socket or box end wrench over the nut, perpendicular to the face of the mounting flange. No big deal, and easily remedied however.
Store Reply
Thank you for the detailed review. Great to hear you were able to get the new housing installed and you were able to notice a difference in bottom end response.
S
Street tractor 6/09/19
The housing is great but...
Everything is nice, but i wasn't sent the baskets to install it. I don't know if i should just order the gaskets, or try and get what i thought i was going to be sent
1 QUESTION
what size flange is for the H1C. I cant find the answer anywere and id hate to buy the wrong turbo blanket?
It is a T3 flange turbo. -Sands
2/12/20
Added To Cart
BD 16CM Non-Wastegated Turbine Housing 88-93 5.9L Dodge Cummins 1045911
Quantity: 0
Cart Total$0000.00