Fast and Free Shipping On Orders Over $100
No Salesmen, Just Enthusiasts 888.993.4373
Take control of your turbo and turn its existing variable vane technology into a fully functioning exhaust brake!
Variable geometry turbos are a major benefit in reducing emissions output and drastically reducing turbo lag due to their ability to essentially reduce the turbine housing size under low boost situations, and then open up as boost and load increases, all done by electronic input.
The professionals at BD have cracked the code and found a way to harness this technology to also create substantial retarding horsepower to slow you down. This simple to install controller and harness will simply take control of the VGT function of your turbo to dramatically slow you down as your foot is removed from the throttle, all without the need to install a traditional exhaust brake in line of the exhaust system. Further, this system has the ability to enhance transmission down shifting, creating higher RPM's, which further accentuates the amount of braking effect. Plug it in, mount the controller and switch, and drive, THAT'S IT!
NO VIDEOS AVAILABLE
- 0 Reviews
- 0 Questions
I have a 2015 F-350 6.7 powerstroke and I installed a dpf delete with a bully dog tuner and now my exhaust brake won't work, seems they didn't put the function in their tuning, would this actuate the vgt for braking with my application??
No sir that BD Exhaust Brake only works on 11-14 trucks. I don't have anything available for a 15 for an exhaust brake unfortunately.
would this affect my tow haul setting in any way at all if I have it on at the same time as the exhaust brake and also I cant find any installation instructions either?
The tow / haul mode would not be effected. The installation manual can be found at https://www.dieselperformance.com/shop/product/brake-variable-vane-exhaust-ford-2011-2014-6-7l-f250-f350-5321
Would this void a factory warranty for any reason? Say turbo goes bad, can you just take this off simply if this does happen with no record of installation?
That module shouldn't void the warranty but every dealer is different you might shoot your service department a call and ask them. It could be removed from the truck but would leave a foot print on the ECM that it was there.
Will this unit work on a 2014 deleted truck that has a bully dog tuner? If so I'm coming through there next week and would like to stop in. Do you stock these? Thx?
The BD VGT brake will work with the Bully Dog tuner. I can have one waiting for you if you shoot us a call in advance. 888-993-4373.
Work with H&S tuner ??
We are not aware of any issues with it working in conjunction with the H&S tuning.
Will it work with a ez lynk from ppei? On a psd 2013.?
These will not be compatible with each other no.
Will this tool work with the SCT Livewire TS? I'm usually towing 4500kg-10,000kg, and it's eating away at my brakes. Also, I have heard different stories about adding an exhaust brake to a non braking turbo, will this hurt my turbo in anyway??
I would double check with SCT to verify, however these generally are fine to work with a existing tuner on the truck. Lastly, no issues on using on the factory turbo.
I have a 2014 Ford 550 Cab Chassey 6.7 Diesel and I'm looking for a exhaust break I can install. Is this what I'm looking for??
These will not work on C&C applications unfortunately.