SKU #: CS-FLVL-SIG-05 Carli 2.5" Suspension Leveling Kit 05-16 Ford 6.0L / 6.4L / 6.7L Powerstroke SuperDuty

$880.00
Purchase Carli 2.5" Suspension Leveling Kit 05-16 Ford 6.0L / 6.4L / 6.7L Powerstroke SuperDuty
    • 2005-2007 Ford 6.0L Powerstroke 4x4
    • 2008-2010 Ford 6.4L Powerstroke 4x4
    • 2011-2016 Ford 6.7L Powerstroke 4x4
  • Add Carli Adjustable Front Track Bar



Description

Level the front of your 2005-2016 Ford 6.0L / 6.7L  Powerstroke with the Carli Suspension 2.5" Leveling System. The Leveling System was designed for people seeking a leveled vehicle with more per ... read more

  • Share

Fast and Free Shipping On Orders Over $199

No Salesmen, Just Enthusiasts 888.993.4373

Level the front of your 2005-2016 Ford 6.0L / 6.7L  Powerstroke with the Carli Suspension 2.5" Leveling System. The Leveling System was designed for people seeking a leveled vehicle with more performance and ride quality than a generic spacer lift. The Carli Signature Series shock's build quality is unmatched for its price point and offers a nice boost in ride quality and carries a lifetime warranty through Bilstein.

Your truck will sit 2.5" higher in the front with 50% more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. Front Carli Signature Series shocks increase the suspension control while the brake line tabs ensure you can make the most of your newfound suspension down-travel. The axle is recentered thanks to the optional Adjustable Track Bar and the included Caster Shims round the off the front-end geometry while improving on the stock handling.

As this system does not include anything for the rear, factory towing and payload capacity are maintained. This is an entry level system that only requires an upgrade to one of Carli's many signature tuned shock packages and an Add-a-Pack or full progressive leaf spring pack to be converted to one of the higher-end systems.

The Leveling System will level the front of the truck to the rear on SuperDuties equipped with the factory, 3-5/8" rear block. Super Duties equipped with a 2" tall block from the factory will require the factory 3-5/8" tall Block to achieve a leveled stance. Part Number: 7C3Z-5598-HB, 7C3Z-5598-JB.

OPTIONAL ADJUSTABLE TRACK BAR FEATURES:

  • Custom machined spacers for maximum articulation and perfect fitment
  • Offset, machined tapered rod end re-aligns axle ball joint for lifted applications
  • Huge strength upgrade: constructed from 1.50 x 3/8" wall tube
  • FK Race Heim frame connection
  • Will NOT work on stock trucks or in Drop Brackets

Specifications

  • SkuCS-FLVL-SIG-05
  • ManufacturerCarli Suspension
  • MPNCS-FLVL-SIG-05
WARNING: CANCER AND REPRODUCTIVE HARM www.P65Warnings.ca.gov
WHEEL AND TIRE NOTE:
  • On Carli's 2.5" Ford Systems, we recommend 17"-18" wheels, no more than 9" wide with 5.5" of backspacing with Carli Fabricated Radius Arms or 5" Backspace with factory arms; 5" will require a bit more trimming. Tires, 37x12.5" will fit with some trimming; 35" will likely fit without trimming. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter.

IMPORTANT NOTES:

  • WHEELS: Carli Recommends a 17"-18" Wheel, no more than 9" wide with 5"-5.5" of Backspacing on Leveling Systems
  • TIRES: 35", E-Rated Tire Fitment is Recommended. Recommended unloaded Tire Pressure 45F/40R.
  • RECOMMENDED CONFIGURATION: Carli Leveling Systems are Designed and Tested on Vehicles with 17"-18" Wheels with 35", E-Rated Tires. Stock wheels and tires or running a larger wheel diameter will result in a stiffer ride.

Videos

Blog Posts

Recommended Products

Recently Viewed

Added To Cart

Carli 2.5

Carli 2.5" Suspension Leveling Kit 05-16 Ford 6.0L / 6.4L / 6.7L Powerstroke SuperDuty

Quantity: 0