Fast and Free Shipping On Orders Over $100
No Salesmen, Just Enthusiasts 888.993.4373
Designed for use when converting to 2nd Gen Style Manifold.
Put the finishing touches on your truck with this high quality Cummins Turbo Drain Tube Kit. The tube is braided stainless steel for durability on the exterior, and corrugate Teflon tubing for flow and maximum flexibility. The fittings are 6061 aluminum with black anodize and come complete with o-rings. The kit contains everything you need to connect your turbo to the factory drain location on your block when doing a 2nd Gen Swap.
- ManufacturerFleece Performance Engineering
- Drain Tube (20" end-to-end)
- Cummins Turbo Drain Tube Adapter
- Turbo Drain Flange Adapter
- Turbo Drain Gasket
- 7/8-14 to -10AN Fitting
- (2) 3/8"-16 Flange Head Bolts
- (2) M10 x 1.5 Flange Head Bolts
NO VIDEOS AVAILABLE
- 0 Reviews
- 0 Questions
I have a 08 Dodge with the 6.7 Cummins it's has a 3rd gen manifold and a s300 turbo will this bolt on directly and not restrict flow eight now I have two 10 an fitting with rubber hose and hate the setup it leaks a little and I just want to be done with the whole situation and if this won't work do you have one that will work?
This is designed for the 2nd gen location, however if you can make it work. It should function the same. I would however recommend measuring your first. This one will be 20"" long.
Will this work on the BD Super B turbo kit I just purchased for my 2012 6.7?
Yes, given that the Super B Turbo is going to be an S300 SX-E style charger, this will work. -Ben
Does this work on a stock 6.7 with the stock he351ve turbo??
Unfortunately this kit is for a 2nd Gen swapped 6.7 Cummins. If your turbo is in the factory position (back towards the firewall) this kit will not work. The only aftermarket drain line we offer for a stock HE351VE is BD-1453105. -Marcus