SKU #: MISH-MMICP-DMAX-17H-Main Mishimoto Hot-Side Intercooler Pipe and Boot Kit 17-19 GM 6.6L Duramax L5P

$343.95
Purchase Mishimoto Hot-Side Intercooler Pipe and Boot Kit 17-19 GM 6.6L Duramax L5P
    • 2017-2019 6.6L GM Duramax L5P
  • Finish Selection



Description

What’s one of the worst things that can happen to you when you’re off roading? Your intercooler pipe blowing up, failing, falling off… well let’s hope it doesn’t just fall off, if it does th ... read more

  • Share

Fast and Free Shipping On Orders Over $199

No Salesmen, Just Enthusiasts 888.993.4373

What’s one of the worst things that can happen to you when you’re off roading? Your intercooler pipe blowing up, failing, falling off… well let’s hope it doesn’t just fall off, if it does then you have some pretty lousy clamps. Instead, improve the power, efficiency, and maximize flow on your 17-19 GM Duramax with Mishimoto’s hot side intercooler pipe and boot kit.

The factory hot-side pipe for the L5P is a measly 2.5" that chokes the engine, while the tight bends and built-in resonator create even more restriction. The Mishimoto hot-side intercooler pipe is 3" in diameter throughout and eliminates the factory resonator to significantly increase airflow, resulting in more power potential. Mishimoto designed this pipe as two pieces, like the factory pipe, for ease of install. This kit also includes our silicone boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts.

To add even more reliability, this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. The Mishimoto 2017-2019 Chevrolet/GMC 6.6L Duramax L5P hot-side intercooler pipe and boot kit is a direct bolt-on upgrade and is available in a polished or wrinkle-black powder coated finish. This hot-side intercooler pipe and boot kit includes the Mishimoto Lifetime Warranty for a lifetime of performance.

IMPORTANT NOTE:
no shipping No Shipping To CA

Specifications

  • ManufacturerMishimoto
  • MPNMMICP-DMAX-17HP | MMICP-DMAX-17HWBK
WARNING: CANCER AND REPRODUCTIVE HARM www.P65Warnings.ca.gov
KIT CONTENTS:
  • (1) Aluminum Intercooler Pipe w/ Bung
  • (1) Aluminum Intercooler Pipe
  • (3) Silicone Boots with DuraCore™ Technology
  • (6) Constant-Tension T-Bolt Clamps
  • Mishimoto Lifetime Warranty
FEATURES & BENEFITS:
  • Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
  • 3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
  • Eliminates stock resonator for improved flow
  • Up to 55% less restrictive than stock piping
  • Bung can be drilled and tapped for additional sensors
  • Requires no additional tuning
  • Includes Mishimoto silicone boots with DuraCore™ technology and Mishimoto constant-tension T-bolt clamps
  • Available in polished or wrinkle-black powder coated finish
  • Mishimoto Lifetime Warranty
TECH SPECS:
  • INSTALLATION TORQUE SPECS: 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).
  • PIPE DIAMETER: 3"
  • CONSTANT TENSION T-BOLT CLAMPS SPECS:
    • (1) 3" Constant-Tension T-Bolt Clamps
    • (5) 3.25" Constant-Tension T-Bolt Clamps
  • PIPE MATERIAL: Aluminum

NO VIDEOS AVAILABLE

Blog Posts

Recommended Products

Recently Viewed

Added To Cart

Mishimoto Hot-Side Intercooler Pipe and Boot Kit 17-19 GM 6.6L Duramax L5P

Mishimoto Hot-Side Intercooler Pipe and Boot Kit 17-19 GM 6.6L Duramax L5P

Quantity: 0