Fast and Free Shipping On Orders Over $100
No Salesmen, Just Enthusiasts 888.993.4373
In extreme heat, high loads, or high altitudes, the swing gate pivots when your truck accelerates to full throttle, opening the ram-air duct mounted behind the front grille and exposing cooler and less restrictive air to your engine.
Testing shows that the ram-air inlet opens when outside temperatures are greater than 91°F and the truck is at full throttle. The ram-air inlet stays open for approximately 3-5 miles or until the truck slows to close to 5 mph. This process repeats itself. Ram-air activity varies with your driving conditions.
Want more air ? Use both inlets.
Unlike stock which uses only one inlet at a time, this kit gives you the option of massive dual inlet airflow. Simply remove the dam from the gate arm and re-attach when desired or to protect against inclement weather.
Note: The gate arm remains active even with the dam removed. This will prevent you from getting an Active Air Box code when both inlets are open. Dam MUST be used in harsh weather conditions including but not limited to rain, sleet, or snow as engine damage can occur. SB is not responsible for engine damage due to failure to use the dam as instructed.
Cleanable or dry filters. You pick.
This kit is offered with two types of filters: cotton (cleanable) or dry (disposable). Since you don't sacrifice performance with either choice, the decision comes down to your preference to throw away the filter or clean it. Part numbers for dry filter intakes end with 'D'.
- ManufacturerS&B Filters
- MPN75-5068 | 75-5068D
NO VIDEOS AVAILABLE
- 0 Reviews
- 0 Questions
Will this pass California emissions??
As of right now, this intake is still pending CARB approval. However, S&B is typically very diligent about meeting CARB, so we expect it to have an E.O. number issued shortly, but until then, it will not pass California emissions.
Do I have to have a programmer on my 2015 ram 6.7 to run this intake??
No, this intake would not require you to have a tuner on your truck. This will work on completely stock trucks.
What's the hp and tq gains??
Here is a detailed link to the test results: https://system.netsuite.com/core/media/media.nl?id=491141&c=1066071&h=edf63a43d06ae0236fa9&_xt=.pdf
Do you reuse the ram air motor from the stock box??
Yes, The RAM active air motor will be re-used into the new box.
Will this void the trucks warranty??
There is a chance that it would yes, any aftermarket part does run that risk. Would just have to check with your dealer.
Is oil required with the cotton filter or can it be used dry? Thanks.?
You would have to use the oil with the cotton filter. It will not function correctly without it.
I clicked on the detailed specs link, didn't see HP or Torque numbers. Can we get a simple (not have to read thru 30+ pages of airflow test results - volume, restriction, dust, etc. - in which I still didn't see any power figures)? Thank you?
It also depends on what is done to the truck. On a stock truck with no upgrades one might pickup 10hp/20ftlbs. On a modified truck that uses more air it will be more.
Does this intake work well with a 2nd Gen conversion kit like the BD-Power Rumble B Turbo Kit. What modifications (if any) would be necessary?
No the tube is all wrong to fit a 2nd gen swap. There wouldn't really be a way to modify it to make it work either. You would end up butchering the tube up to even get it remotely close.