Fast and Free Shipping On Orders Over $100
No Salesmen, Just Enthusiasts 888.993.4373
Whether you've got an oil leak now, or you're building a new engine and don't want to deal with one in the future, this Dipstick Adapter Repair kit is the once and for all solution! This kit completely eliminates the stock dipstick adapter, replacing it with a new machined aluminum adapter that features a double o-ring seal on the OUTSIDE of the oil pan. This kit can be installed with the oil pan still on the engine, and the engine still in the truck. Best of all, if the o-rings in this kit should ever leak, this adapter can be quickly and easily removed and reinstalled with new o-rings...all from outside the oil pan!
- Metzfab Dipstick Adapter
- Machined Aluminum Dipstick Adapter (instead of cheap pot metal)
- Machined Steel Backing Plate/Brace
- Stainless Steel Screws with Copper Sealing Washers
- Double O-Ring Set for a Positive Seal
- Correct New Ford Dipstick O-Ring
- Detailed Full Color Installation Instructions
- Installs Quickly Without Oil Pan or Engine Removal
- Quickly and Easily Serviced If Necessary
- Fits 94-97 "OBS" Trucks, 99-03 Super Duty Trucks Excursions and E-Series Vans
- Patent Pending
Note: This product may require modification to fit engines using HYPERMAX connecting rods or using an AFTERMARKET Engine Girdle across the main caps. It has been used with both products, but clearances should be closely checked and installation may require additional steps.
Strictly Diesel Dipstick Repair Adapter Kit - FREQUENTLY ASKED QUESTIONS:
Q : Do I have to remove the engine and/or the oil pan to install this part?
A : No, this Dipstick Adapter installs from the OUTSIDE of the oil pan and does NOT require removal of the engine or the oil pan for installation or service.
Q : How do I get the factory part out of the oil pan when installing this Dipstick Adapter Repair Kit?
A : You don't. The interior portion of the factory dipstick adapter stays in the oil pan. During the installation, after removing the original o-ring (so it doesn't get stuck in the oil pickup and reduce oil flow), this part is dropped into the lowest part of the oil pan sump, where it will remain until such time as the engine and oil pan are removed.
Q : Can the factory part that is left in the oil pan cause any engine damage?
A : No. The factory dipstick adapter will sink to the bottom of the pan and have nowhere to go. It is too large to enter the oil pickup tube and there is nothing else in the bottom of the oil pan for it to interfere with. The only possibility for any issues with regard to the part in the bottom of the oil pan would be in the case of the engine being operated upside down (a situation that more than likely means that you've got bigger problems than whether the engine continues to run or not).
Q : How does the Dipstick Adapter Repair Kit work?
A : This Dipstick Adapter has a rear support brace (not shown in the above photo) that goes in through the opening of the oil pan and is swiveled into place during the installation. The 2 screws visible in the photograph above are used to retain that support brace and pull it tight against the interior wall of the oil pan, which compresses the 2 o-rings against the outside wall of the oil pan and creates the seal.
Q : Is there any drilling or modification to the oil pan required?
A : No, there is absolutely no modification to the factory oil pan required to install this Dipstick Adapter.
Q : Does this product include installation instructions?
A : Yes. The kit comes complete with a new Ford O-Ring and a set of Detailed Full Color Installation Instructions that show how to install the product into both an "OBS" (94-97) and "Super Duty" (99-03) style truck.
- SkuDD-DIPSTICK ADAPTER REPAIR KIT
- ManufacturerDriven Diesel
- MPNDIPSTICK ADAPTER REPAIR KIT
- 0 Reviews
- 0 Questions
Will your adaptor work on a 2002 E350, 7.3 PSD? It's a van, not a pickup truck.?
Yes, we have not had any issues in Van applications.
Does this require oil pan removal for installation? how do the set screws thread in? -Thanks?
No, pan is left in place, and installed with it on vehicle. I would recommend to watch the video or check out the instructions.
[email protected] I have a 1995 Ford 7.3 L the oil adapter Assembly felt to the bottom of the oil pan I need to know if this product will save me from pulling my engine can I leave the adapter that fell into the oil pan in the oil pan and does this adapter that you sell install from the outside I can't tell from the video I watched if I'll be able to get it from the outside into the big hole thank you?
Yes that is exactly how it is supposed to work.
If done several of these with no issue. Tonight I was doing one and the old adapter is stuck at the back and did not go to the bottom of the oil pan. Ever had this issue? I been digging around for over 3 hours...decided it was time to walk away?
Is it stuck in the pan still? Someone may have tried to JB weld or Epoxy it in. Or stuck towards the back of the pan? I don't remember if those are magnetic. But try a strong magnet to see of it will move around. Maybe get a inspection camera in there to see it.
Is this product considered a more permanent solution to the 7.3 dipstick leak or a more convenient fix?
This would be considered a permanent solution and fix.