Fast and Free Shipping On Orders Over $100
No Salesmen, Just Enthusiasts 888.993.4373
Carli's selection of adjustable track bars are one of their most popular items, and for good reason. Built from chromoly and featuring heavy duty rebuildable joints, you can literally feel the difference all the way to the steering wheel with the improvement in ride. You'll be wondering why you waited so long for such a simple upgrade.
A track bar upgrade isn't necessarily a product that weight heavy on most when considering a suspension lift. While it's often overlooked as a simple geometry correction that will be addressed by whatever lift-kit is purchased, most leveling kits do not address it whatsoever. Lets fix this! Enter the Carli Suspension 2017 Super Duty Track bar. This game-changing track bar takes center stage offering 1.5" OD x 3/8" (wall thickness) chromoly construction, allowing direct threading (no weld-in bung) of a massive FK Bearing heim joint paired with the star of the show, Carli's Encapsulated Uniball in a fully welded and strap-gusseted housing.
The Carli Track Bar's dual FK Bearing pivots allow the bar to cycle free from the bind of the factory double-vulcanized bushings, while offering vibration damping to minimize road noise transmission and maximize service life. The Encapsulated FK Uniball was tested to -110°F and took it in stride with no cracking or deformation, even loss of damping during subjection to the extreme cold. The Heim and Encapsulated Uniball are both replaceable, allowing users to rebuild rather than replace their bars.
Designed and built to maximize travel and ensure factory compatibility, this track bar best suits 2.5" and 4.5" lift systems with OEM steering geometry (no track bar or pitman arm drops). In lieu of travel-limiting drop brackets, the Carli Track Bar includes different axle-spacer configurations engineered to alter the lower pivot to better match the factory steering arc respective to each lift height. Laymen's terms, the bar includes all components necessary to configure specifically to both 2.5" and 4.5" lift steering geometry to minimize steering wheel feedback.
Carli Suspension considers the Track Bar to be the single most important - ironically, also the most overlooked - component in the front end. It's highly leveraged as both a steering and suspension component and it's strength, geometry and vibration damping properties directly translate into perceived quality of the entire suspension. A worn or neglected factory track bar results in loose or delayed steering input, improper axle alignment, bump steer, death wobble, or excessive road noise through the steering leading to increased driver fatigue and little confidence in the vehicle's handling capabilities, exacerbated in lifted or leveled vehicles. The Carli Track Bar is excessively durable, vibration damping, geometry correcting, fully serviceable and adjustable to fit both lift heights offered by Carli.
IMPORTANT NOTE: This bar is not compatible with drop-pitman arms or aftermarket track bar drop brackets.
- ManufacturerCarli Suspension
- 1.5" OD - 3/8" Wall Chromoly Construction
- 1.0" FK Bearing Heim with 7/8" Grade 8 Hardware at the Axle
- Proprietary, Encapsulated 7/8" FK Uniball at the Frame
- 17-4 Stainless Steel Misalignment Spacers
- 2017-2019 Trucks Configurable to 2.5-4.5" Lifts without a Drop Bracket
- 2020 Trucks Configurable to 3.5-5.5" Lifts without a Drop Bracket
NO VIDEOS AVAILABLE
- 0 Reviews
- 0 Questions
Would this track bar be compatible with my 2017 F-350 Readylift 3.5"" SST Kit if I re-installed the stock Track bar bracket.?
If the stock bracket is in place, then yes.
I'm waffling between the BDS and the Carli adjustable track bar. I only have a 2"" inch leveling kit and am curious if the Carli bar will work with that short of a kit.?
For a 2"" lift, you should not have a problem. They will work on 2.5-4.5"" of lift but that extra .5 inch will not make a difference. -TL
I have a 2018 ford f350 crew cab 4x4 long bed. It has the death wobble. There is no lift on the truck or bigger tires. Will this bar stop the wobble and fit on stock ride height? Thnks for your time?
This Carli Track Bar will only fit on a truck with 2.5"" to 4.5"" of lift. I would recommend calling in at 888-993-4373, and we will be able to help you diagnose your problem further. -AH
Will your trac bar work on a 6” skyjacker lift with a drop bracket??
Unfortunately Cali does not offer a drop bracket for 6" lifts. -MC