Fast and Free Shipping On Orders Over $100
No Salesmen, Just Enthusiasts 888.993.4373
Level out your Air Ride Ram the right way using this complete kit from BDS that ensures you don't lose any of the functionality of your air ride system while delivering the required clearance to run larger tires.
This 2" leveling kit is designed around the tried and true leveling kits for the late model RAM 2500 trucks to lift and level that stance while allowing for 35" tires to be installed. Up front, the kit utilizes a pair of pitched and indexed steel fabricated upper coil mount spacers. These spacers bolt into place using supplied hardware and match the unique coil design of the Ram HD and are finished in a durable textured black powdercoating.
In addition to the coil spacers, a pair of extended polyurethane bump stops are used to control suspension compression. In the rear a pair of replacement leveling sensor brackets are supplied to correct the factory air ride suspension level to sit evenly with the front, while working within the factory parameters for sufficient suspension travel. Finishing off these kits are your choice of BDS NX2 gas shocks or FOX 2.0 performance IFP gas shocks to improve ride quality and offroad dampening performance. Level out your late model air ride Ram 2500 with BDS Suspension.IMPORTANT NOTE:
- The image depicts the optional, upgraded Fox 2.0 IFP (Internal Floating Piston) shocks. The base kit includes BDS' own NX2 series.
- ManufacturerBDS Suspension
- 2" Front Coil Spacers
- Extended Front Bump Stops
- Rear Leveling Sensor Brackets
- Front and Rear Shocks (NX2 or Fox)
- 35 x 12.50 Tires
- 17x9 / 18x9 / 20x9 Wheels on 5" Backspacing
NO VIDEOS AVAILABLE
- 0 Reviews
- 0 Questions
Will I run into issues with a 10 inch wide wheel??
With the proper offset shouldn't have any issues, You probably wouldn't be able to run 35's though. Probably stuck with 33's
On trucks with rear air ride will this make the truck sit nose high??
It should be level with that kit. It includes new brackets to re-position the arm for the ride height sensor.
Would this work for a 3500 with auto leveling rear air suspension or will a standard leveling kit work??
It will not unfortunately. I don't have a leveling kit for the auto level 3500. They are only about an inch from level from the factory.
Will this work with a Factory auto level air on a 2014 Ram 2500??
Yes, this is for air equipped rear end trucks. If your truck has full air in 4 corners it will not.
I bought this system a few months back and I was wanting to change the 2"" leveling blocks to 2.5"". Will the shocks still be okay or will the max out??
The shocks should be compatible without issue.
DO you have to purchase new sensors or use the existing ones ??
Reuses the existing sensors. SNA
Will the truck ride harder in the rear due to it putting more pressure in the rear air bags??
We haven't noticed any detriment to ride quality with that kit.
so for 2018 3500 4x4 SRW with auto leveling in rear - with height difference of about 1"" front to rear - would a leveling kit be needed to put on 20x10 -24 offset wheels with 35x12.5 tires? There looks to be plenty of room to handle the 35's with the extra offset from stock wheel location.....?
You have to take into account that when you do an offset wheel tire like that, the wheels tends to ""sweep' back and forth a little more front to back. On a stock truck you will more then likely have to do some minor trimming.