Fast and Free Shipping On Orders Over $100
No Salesmen, Just Enthusiasts 888.993.4373
Do you want a clutch capable of supporting 600 horsepower and plenty of abuse? Check out this ceramic replacement clutch kit from Valair!
- Ceramic/Ceramic: These clutches utilize two ceramic facings on the clutch disc and are aimed at the high performance trucks, these are the best of bad clutches. Driving manners are very performance oriented with no clutch slip, basically the clutch is in, or it is out. Great holding capacity for highly modified trucks, the only way you will get more holding power is to go to a Double Disc Clutch setup. Ceramic is a very hard material so typically flywheel wear is more noticeable using a ceramic clutch than with other materials. Pedal pressure is typically a little higher than factory pedal pressure. Hydraulic upgrades are recommended. Some clutch rattle may be noticed while idling in neutral. Ideally suited to trucks with high performance power modifications with 550-650HP. (Not recommended for towing)
- ManufacturerValair Clutch
- 13.00" x 1.375" Performance Replacement
- Ceramic Buttons
- HD Spring Hub
- Rated @ 600HP / 1100 ft lbs Torque
- 3400# Pressure Plate
- Pressure Plate
- Clutch Disc
- Release Bearing
- Pilot Bearing
- Alignment Tool
NO VIDEOS AVAILABLE
- 0 Reviews
- 0 Questions
No Reviews Yet! Be the first one.
Dose this clutch require a diffrent flywheel than stock??
It will as long as you have a 13inch clutch right now. Some of the early 6 speed trucks have a 12.25 Diameter clutch. DppSands