Fast and Free Shipping On Orders Over $100
No Salesmen, Just Enthusiasts 888.993.4373
BD's Adjustable Track Bar is built from rigid 1 3/8" DOM (Drawn Over Mandrel) seamless heavy wall 0.313" tubing with formed and precision welded collars that have durable, heavy duty Poly bushings. With the OEM ball joint design, frequent maintenance is required to prevent side-to-side movement of the front axle which can cause wear, hammering, wandering and the dreaded "Death Wobble." BD's Track Bar is the perfect solution for steering stability and is a great compliment to BD's Steering Box Stabilizer. Plus, it is adjustable to accommodate up to 3"-4" lifts!
BD's Adjustable Track Bar Kit comes complete with zinc plated bar, poly bushing kit and grease nipples.
Product Warranty: 1 Year Parts
NO VIDEOS AVAILABLE
- 0 Reviews
- 0 Questions
If I have an eight in lift in the front and 6 in the back would this kit work for me? Just noticed how it said that it can adjust for a 3-4 inch lift.?
This track bar will only accommodate 0-4"" of lift. Anything further then that will require a drop track bar bracket. I would recommend checking out the Carli bar with their drop bracket.
08 dodge ram 2500 with 6 inch fab tech lift-what length do i set this track bar at? truck on the ground and turn the wheel back and forth to center the axle under neath the truck then install the track bar??
The length is adjustable. It would need to be adjusted to whatever length locates the axle correctly.
I have a 04 Dodge Ram 2500 and just put a 2"" leveling kit on it will this part work for my truck or is it just for the 3""-4"" lifts?
You could run that bar on a stock truck up to 3-4in lift. It will work perfect on that leveled truck.
I have a 2015 ram 2500 4x4 will this product fit? I like it because it has the adjustment in the center of the bar instead of the ends. I found other products listed for my year model but dont like the design.?
No that track bar will not fit your application.
Is the adjustable Track bar kit good for my 2005 Dodge Ram 2500 Larimie Quad cab 5.9L Turbo Diesel with 18""Wheels 37"" Tires with 6"" lift? I have steering box drop stabalizer, linkage upgraded new bilstien shocks. I had new king pin and bushings put in and alignment done and now i have a DEATH WOBBLE issue if i hit a bump. Is the Track bar kit good for my truck with the 6"" lift??
Your truck must have a drop track bar bracket in order for a track bar such as this one to work.
product image shows two zerk fittings, what type of grease is best to use. synthetic??
Any quality wheel bearing or synthetic bearing grease will work on these.
what is the I.D. of the bar ends that the bushings go in??
Are you looking for replacement bushings?
does this track bar have zerk fittings in both ends?
Yes it does.