BDS Suspension 5" Performance Elite Coilover Radius Arm Lift Kit 23-24 Ford 6.7L Powerstroke F250/35

Are you ready to gain some altitude in your SuperDuty coupled with increased suspension performance? Whether your truck stays on the pavement or you like to hit some dirt on the weekends, this coilover kit from BDS will not only deliver additional ride height for larger tire fitment and ground clearance, but also a better ride, no matter the conditions. As far as quality...no cheap coil or radius arm spacers here, only fine tuned replacement coilovers and stout, stellar looking radius arms with this kit!At the heart of this system is a pair of heavy duty radius arms built to withstand whatever abuse you can throw at them. Built from 1-3/4" OD -10GA DOM tubing with support gussets, these replacement arms are far superior to the factory stamped steel units. They use a high clearance design for extra ground clearance and are formed inward to allow for additional clearance of oversized tires. They incorporate factory style 3-1/4" rubber bushings to minimize road vibrations and allow for a long, maintenance-free bushing life. The arms bolt into the factory mounting points and reposition the front axle to correct caster angle.The additional 5" of lift comes from a pair of FOX 2.5 Performance Elite (PE) coilovers. These aluminum bodied coilovers offer improved damper performance, better heat dispersion and easy tuning via the DSC (dual speed compression) adjusters located on the reservoir allowing you to dial in the high-speed and low-speed compression settings. These coilovers come pre-tuned and full assembled to easy installation with the provided bolt-on coilover mounting brackets. To improve steering angles a forged drop pitman arm is supplied with an integrated drag link flip. Used in combination with the a heavy duty track bar that will position the front axle for improved handling. Also included for the front suspension are a pair of sway bar relocation brackets, bump stop extensions, brake line relocation brackets and your choice of series steering stabilizer with mounting bracket. Out back a bolt on lift block is used in place of the factory block on the F250 or F350 to level the stance. BDS designs this kit as a complete solution to transform your Super Duty to tame the any terrain.. Longer black e-coated u-bolts round out this 5" radius arm lift system.Rear Shock OptionsChoose between custom valved Fox 2.0 Performance Series shocks or Fox 2.5 Performance Elite Series Shocks to outfit the rear of your Powerstroke. Fox 2.0 Series - Fox 2.0 performance series shocks have been tuned and tested by both Fox and BDS Suspension to maximize performance specific to each application and to every BDS Suspension system. The basic shock design is based on proven Fox Racing Shox race products, but re-designed to maximize the ride quality, handling, and control of your BDS equipped truck or jeep, whether on or off the road. Fox 2.5 Performance Elite Series - Step up for next level performance with these FOX 2.5 factory series remote reservoir (R/R) shocks. These shocks offer race proven technology specially valved and ready to bolt-on and perform right of out the box. These shocks have the added benefit of easy to use DSC (dual speed compression) adjustment for high-speed and low-speed compression adjustability built into the end of the reservoir to dial in performance for various terrains. The larger 2.5" body, stronger internals and external remote reservoir improve damper capability across any terrain.