PROJECT X Series One Free Form Single LED Auxiliary Light

The Series One lights from PROJECT X are engineered with advanced free-form optics, these lights efficiently harness the power of LEDs, directing a focused beam that penetrates farther down the road, leaving no light wasted. Drawing inspiration from traditional halogen lights, the FF line of lights offers a recognizable reflector housing, combining the warmth of traditional light with the efficiency and output of LED technology. POWER EFFICIENCY TO LUMEN OUTPUT These lights excel in converting power into luminous output, ensuring maximum brightness without draining excessive power. ENHANCED FREE-FORM OPTIC DRIVE TECHNOLOGY Leveraging advanced free-form optics, these lights capture and concentrate a higher percentage of emitted light from the LEDs. This results in a superior penetrating light output that eliminates wasted light, directing it precisely where it's needed on the road. LIGHTWEIGHT DESIGN Despite their powerful performance, Series One lights boast a lightweight construction, making them easy to install and maneuver without adding unnecessary bulk to your vehicle. THE IMPORTANCE OF BEAM PATTERNS Beam pattern refers to the distribution of light emitted by a light source, typically depicted as a pattern or shape projected onto a surface. It describes how light is dispersed in different directions and angles from the source. Spot Beam: The spot beam produces a narrow and focused beam of light with a long reach. It provides intense illumination in a straight line, making it ideal for long-distance visibility and spotting objects or obstacles ahead. Flood Beam: The flood beam pattern emits a wide and diffused beam of light with a broad coverage area. It spreads light horizontally and vertically, illuminating a large area with uniform brightness. These are universal lights that can be installed on various locations. If you have a specific location or a bracket designed for light mounting, utilize the provided hardware, and select one of the two mounting holes on the bottom of the light. Once mounted, remove the side-end caps to expose the bolt connecting the mount to the light. Loosen this screw to facilitate adjustment and tighten it once you've achieved your desired positioning. PROJECT X BLACKOUT COVERS These PROJECT X Blackout Covers protect your LED lights from the elements. Our virtually-unbreakable hard coated polycarbonate covers provide an added layer of protection from rocks, sand, dirt, mud, snow, or highway debris. These blackout covers are sold individually. GHOST BOX SYSTEM PROJECT X recommends incorporating the Ghost Box System into your setup. Much like an Auxiliary Switch Panel, it streamlines and tidies up wiring, providing additional benefits such as app-based control, individual ON/Strobe and Dimming capabilities for each circuit, as well as features like Low Voltage Protection and Over-Current protection, among others.