If you've lifted your truck or your factory track bar has wore out, the Synergy heavy duty Ford track bar is a great solution to get you back on the road. Adjustable track bars are used to help center your axles when leveling the truck or running a suspension lift. This track bar significantly improves lateral stiffness over stock and is considerably stronger than stock to hold up to the abuse of large tires and aggressive off road driving. Length is adjustable on the vehicle to make adjustments a breeze. It uses a maintenance free Synergy Dual Durometer Bushing on the drivers side and a metal on metal HD tie rod end on the passenger. The bar is bent to clear most aftermarket differential covers at full bump. Pair with Synergy's Drag Link and Tie Rod to bulletproof your steering and guarantee product compatibility from stock height to 4 inches of lift.
Specifications
- ManufacturerSynergy Manufacturing
- MPN8675-01 | 8675-11
- 2017+ Ford Super Duty F-250 / F-350
- 2005-2016 Ford Super Duty F-250 / F-350 with use of 8675-11 Adapter Slug
- 2005+ Ford Super Duty F-450 / F-550 with use of 8675-11 Adapter Slug
- Allows centering of front axle when running a suspension lift
- Adjustable without removing from vehicle
- No jam nuts that are impossible to keep tight
- No modifications required to install
- Isolates Noise, Vibration, and Harshness (NVH) increasing ride quality
- Compatible with Synergy HD Steering
- Bent to clear most aftermarket differential covers
- Made from high quality 1.50 inch x .250 wall DOM
- Retains factory track bar mounting bolts & hardware
- Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
- Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting bolt
- Features Synergy Dual Durometer Bushing (DDB) with Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality (drives side)
- Features Synergy greaseable metal on metal tie rod end for stronger connection to the axle
- 100 percent bolt on components assures an easy, trouble free installation with the use of basic hand tools
- Limited Lifetime Warranty
- 2005-2016 F-350 / F-350 and 2005+ F-450 / F-550 will need to use Synergy part 8675-11 adaptor slug, to convert the early model axle interface to a late model
- 2005+ F-450 / F-550 ill run the track bar in a different position than the F250/F350. Please see the instructions below for correct installation
- The replacement driver side bushing - 4327-02
- The replacement passenger side tie rod end - 4154-L
- Min collapsed length: 36.375 inches
- Max extended length: 37.75 inches
- Synergy High Performance Grease recommended (4119)
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Added To Cart
Synergy Manufacturing Adjustable Front Track Bar 05-23 Ford F250/F350/F450/F550
Quantity: 0
Cart Total$0000.00