Enjoy free shipping on all orders over $100 *

SKU #: SB-75-5093-Main S&B 75-5093 Cold Air Intake 07.5-09 6.7L Dodge Cummins

$299.00
Purchase S&B 75-5093 Cold Air Intake 07.5-09 6.7L Dodge Cummins
    • 2007.5-2009 6.7L Dodge Cummins
  • Options

Description

S&B Filters diesel performance intake kits are all about improving airflow to your Cummins' engine. This intake system flows 37.06% better than the OE Induction System while removing 99.43% of the ... read more

  • Share

Fast and Free Shipping On Orders Over $100

No Salesmen, Just Enthusiasts 888.993.4373

S&B Filters diesel performance intake kits are all about improving airflow to your Cummins' engine. This intake system flows 37.06% better than the OE Induction System while removing 99.43% of the airborne dirt at the Vehicle's Rated Flow. It's just a matter of superior design. Better airflow translates into a noticeable increase in power, acceleration and most importantly...bragging rights.

FILTER OPTIONS: DRY DISPOSABLE vs. OILED
  • Would you prefer a filter you can clean and reuse, or one that you just merely replace? This question really comes down to the end user. Since you are not sacrificing performance with either choice, the decision comes down to your personal preference. The cleanable filter is an oiled design where the disposable is considered dry, thus no oiling is to be done. One saves time, the other saves money...you choose!
  • Both filters feature comparable airflow to one another and afford the same great protection.
  • The dry, disposable filter typically lasts for 15,000 miles of highway driving. Extend the life of the filter using compressed air.

Larger than Stock Air Inlet. S&B's larger than stock inlet with radiused lip feeds more cool air to the filter.

Cooler Air. Better Performance. S&B's one piece air box design features an integrated box seal that keeps out unwanted engine heat. The cooler the air, the greater the density, resulting in better performance.

Choose your Airflow. Designed with a secondary inlet that increases airflow. A plug is included for those who prefer to pull in air only from the stock fender inlet.

Large Clear Lid with Seal. S&B's signature clear polycarbonate lid provides great looks. Featuring a rubber trim that ensures a perfect seal.

Fit and Finish are Second to None. This intake kit installs in less than an hour and drastically outperforms the stock intake.

A Huge Air Filter. Surface area is your friend when it comes to filters, which is why S&B makes their filters big and with deep pleats. The result is a great flowing filter that will properly protect your engine.

S&B's intake kits are engineered to improve the airflow to your car's engine. It starts with years of research and development, as well as the most technically advanced testing. S&B tests to the ISO 5011 Air Filtration Standard in a climate controlled lab when designing and testing our intake kits. This is the same technology used by Ford, Chrysler and General Motors to design the original induction system that comes on your vehicle.

Airflow - It all starts with airflow. The more air that your engine breathes, the more oxygen it receives. More oxygen results in a better combustion. Better combustion translates into more power and better fuel economy. This is why your vehicle runs better on cool mornings than on hot afternoons as cool air is denser and contains more oxygen. You can feed your engine more oxygen by reducing the restriction of the airflow.

S&B Thorough Research & Development - During ISO 5011 testing, S&B first measures the restriction of the airflow through your vehicle's original induction system in order to establish a baseline. The goal of a Performance Intake Kit is to reduce the restriction of the airflow to your vehicle's engine. Basically, they want to make it easier for the engine to breathe. By reducing the restriction of the airflow, your engine will have better throttle response and produce more horsepower and torque. Since your engine will not have to work as hard to produce the required amount of power - the result is better fuel economy.

S&B Backs It Up: Certified Test Results - S&B provides ISO 5011 Certified Test Results for its intake kits, so you can see exactly how much the airflow was improved (restriction decreased) as well as the efficiency of the filter. ISO is a worldwide federation of national standards bodies. The work of preparing International Standards is normally carried out through ISO technical committees. The specific individual International Standard utilized by S&B and automotive manufacturers establishes and specifies uniform test procedures, conditions, equipment, and a performance report to permit the direct laboratory performance comparison of air cleaners, in this case, those used on internal combustion engines and compressors used in automotive and industrial applications.

carb California Air Resource Board D-590-19

Specifications

  • ManufacturerS&B Filters
  • MPN75-5093 | 75-5093D
WARNING: CANCER AND REPRODUCTIVE HARM www.P65Warnings.ca.gov This product can expose you to chemicals including silica - crystalline, carbon black, methylene chloride, lead and lead compounds which are known to the State of California to cause cancer.

NO VIDEOS AVAILABLE

Blog Posts

Recommended Products

16 Reviews
4.75/5
(12)
(4)
(0)
(0)
(0)

Expect an answer within the next 48 hours

  • 0 Reviews
  • 0 Questions
Rate S&B 75-5093 Cold Air Intake 07.5-09 6.7L Dodge Cummins

Reviews may be edited for spelling or grammar inaccuracies and those containing profanity will be removed.

J
Verified Buyer
S&B for every vehicle!
S&B filter's are top notch. Install was a breeze. The unit looks very good. I had a problem keeping the tube from pushing into the air filter housing through the huge Gasket. The big gasket is for aesthetics as it doesn't affect anything.
J
Better than stock obviously, the only reason ...
Better than stock obviously, the only reason I gave 4 stars instead of 5 was because I was a little disappointed on intake temp. I was assuming with it being sealed intake I would be getting cooler temps, temps range around 50 hotter than outside air temp ( can't run scoop because of aftermarket bumper so not sure if that helps), warmer than other SI's I've had in the past. Install was easy. Overall I'm satisfied with this intake and would recommend it. Not too many selections for a sealed intake and I only buy from DPP.
M
Easy to install, added scoop provides great a...
Easy to install, added scoop provides great air flow. No loud motor noise when rpm s get up because this is a sealed box. All you hear is a slightly louder turbo spinning which will keep you grinning. Exactly what I was looking for.
B
Good product, easy to install, looks great.
Good product, easy to install, looks great.
K
I've had AFE and K&N and this is the third S&...
I've had AFE and K&N and this is the third S&B I've put in a truck and it is superior design and the fit and finish is everything you could ask for. Looks good under the hood too!
P
I have owned K&N kits and Banks kits before. ...
I have owned K&N kits and Banks kits before. The fit, finish and so far the function of this kit is far superior. I ordered it along with the under bumper scoop. I have complete belief that I purchased the best intake I could for my 2008 dodge mega cab 6.7.
B
great product. looks good. it was easy to ins...
great product. looks good. it was easy to install. The only thing i had trouble with is my hood open alarm sensor. It was in the way of the airbox and I had to remove it. I then had to fool the sensor by taping the switch in the closed position so that my hood open alarm on the dash would go off.
K
Outstanding product, like how it fits,i paint...
Outstanding product, like how it fits,i painted it to put some color under the hood. It took a lot to get the paint from chipping off, need to make it paintable,
Pages 1   2
1 QUESTION
E

I would like to order just a replacement filter for this intake can I get a part number?

Replacement filters would be part number KF-1035 for oiled, or KF-1035D for dry. - AW

1/1/19

Added To Cart

S&B 75-5093 Cold Air Intake 07.5-09 6.7L Dodge Cummins

S&B 75-5093 Cold Air Intake 07.5-09 6.7L Dodge Cummins

Quantity: 0

Compatible Products