Have you ever wanted the crawling ability of four wheel low, but without the difficult turning of it? Short of installing mechanical locking hubs, you could always disconnect your front driveline. Or, install this simple and inexpensive fix from BD!
This kit disables the vacuum controlled automatic front hubs on four wheel drive Rams so that the transfer case can be shifted into low range for the rear wheels only.
This kit disables the vacuum controlled automatic front hubs on four wheel drive Rams so that the transfer case can be shifted into low range for the rear wheels only.
Specifications
- SkuBD-1030703
- Dimensions10.4 8.4 2.4
- ManufacturerBD-Power
- MPN1030703
WARNING: CANCER AND REPRODUCTIVE HARM
www.P65Warnings.ca.gov
FEATURES and BENEFITS:
- Designed to allow the operator to manually disable the front wheel drive mechanism by holding the hubs in the free (2WD) mode with the transfer case in 4WD low range
- By allowing the front wheels to be disengaged, maximum torque is available to the rear wheels
- This will also allow for sharp "All The Way Over" turns without the front axle u-joint hopping or binding
- With this kit installed, the front wheels will NOT be driven through the transfer case
- Allows to have full power and torque while in a high gear reduction applied to the rear axle(s) only
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Added To Cart
BD 2 Low Unloc Differential Kit 94-02 Dodge 5.9L Cummins
Quantity: 0
Cart Total$0000.00