Fast and Free Shipping On Orders Over $100
No Salesmen, Just Enthusiasts 888.993.4373
From street and towing to full race, BD Builds Them Best!
To some it is a challenge to simply disassemble and assemble a Ford transmission. For BD, the challenge was to improve the durability and performance of these transmissions in demanding, high-torque diesel applications.
The smooth shifting associated with the stock Ford transmission is the result of slippage that produces heat and accelerates wear. BD transmission and converter clutches are made from specialized, high-performance materials, and 33% more clutch surface is added to eliminate slippage.
A re-programmed valve body with improved valve designs, higher line pressure and enhanced oil flow creates positive clutch apply, which results in quick, sharp shifts. A BD deep-sump aluminum pan is also fitted, which increases oil capacity for cooler operation. The planetary gear packs are made from high-strength steel, and heavy-duty, one-way roller Sprague clutches maintain directional stability, unlike the stock or inferior aftermarket products, which can explode.
Finally, each transmission's shift pattern and oil pressure is tested on our transmission dynamometer, then shipped to you in a virtually indestructible molded plastic container. For ultimate strength and reliability.
|5R110 Clutch Count|
SHIPPING POLICY - PLEASE READ - Due to the size and weight of transmissions, they cannot be shipped through traditional couriers, such as UPS, FedEx, USPS, etc. and MUST be shipped via truck freight. We do not offer free shipping on transmissions, however, we do offer a very competitive flat rate charge that is added to your shopping cart at checkout. Further, to aid in returning your core transmission, we give you the option to be billed up front for the core return and we will coordinate the pickup and return of your transmission. Once your core transmission is ready for pick up, you just need to give us a call or send us an e-mail with your original order number and the core tag on the transmission, and we'll take care of the rest. Otherwise, we give you the option to coordinate the return shipping on your own and independently pay your courier of choice. As always, if you have any questions, give us a call or send us an e-mail.
IMPORTANT NOTES: If your truck has PTO provisions, please make note of this in the comments section at checkout.
WARRANTY - 36 Months / 150,000 Miles. Use of a 3rd party or OE converter will invalidate the transmission warranty.
- MPN1064484SM | 1064482SM
- BD rigid aluminum heavy duty transmission pan
- Adds 6qt extra oil capacity
- Reduces case flex
- Reduces internal oil leakage
- Heat-dissipating fins keep temperature down
- Magnetic drain plug
- Tighter clutch packs that provide a quicker shift
- 30%-40% more clutch material with additional steels
- Machined direct piston
- Machined intermediate pressure plate
- Machined overdrive piston
- Machined overdrive pressure plate
- Improved internal lubrication by adding high power boost valves
- Heavy duty snap ring and blow-off valve to prevent runaway pressure damaging case
- Reworked front pump
- Added lube circuits
- Heavy duty regulator valve to prevent crossleaks
- Improved bearing designs
- Upgrade supports
- Upgraded sprags
- Upgraded planetaries
- Sure-loc snap rings
- Replace plastic pressure plugs in valve body with aluminum
- Solenoids hard wired providing high temperature resistance
- Enhanced stall-Street/Towing applications
- Torque multiplying cast aluminum stators
- Lower rpm response than the stock converter
- More efficient operation
- Less heat and better fuel economy
- Stamp forged steel front cover
- Furnace brazed fins
- Up to triple the amount of lock up clutch material
NO VIDEOS AVAILABLE
- 0 Reviews
- 0 Questions
what type of horsepower is this transmission capable of holding? every builder i talk too says the stock transmission can hold up to 500 as long as its not constantly abused and kept cool. Also whats the warranty? and finally what converter comes with it??
We don't rate transmissions by horsepower, more so by intended use and current and future mods. A 500hp Daily that has proper gears and wheel and tire size will run with no problem. But a 500hp lifted truck that has the incorrect gear ratio vs wheel and tire is going to put an enormous amount of strain on the transmission. Both trucks are 500hp but one of them is going to nuke the transmission very quickly. The other will live a long happy life. Those transmissions have a 36 Month/150,000 mile warranty and the converter is the BD Single disc Enhanced stall Converter.-Sands