YOUR #1 SOURCE FOR #2 POWER!!

The Cool Hose ULTIMATE Intake tube for the Dodge Cummins

DYNO and REAL-WORLD proven to work

Benefits of the Cool Hose:

■ 6- Layers of reinforced webbing with a stainless steel wire wrap for lasting strength and durability
■ Silicone rubber construction
■ The Cool Hose insulates intake air from underhood heat better than any other aftermarket tube (See chart below)
■ Smooth bore hose with long sweep bends to minimize air flow restrictions and pressure drop
■ 4” inside diameter throughout the hose
■ Superior fit and finish
■ Easy to install
■ Dyno tested to produce more power than any other aftermarket intake tube.  An additional 3.0 HP** (w/ stock fueling) or an additional 5.5 HP** (w/ power box set @ 80 HP) and increased torque throughout the RPM range (See Technical Information for dyno graph)

** Must have PSM “Cool Power” cold air intake kit installed along with the Cool Hose to realize these additional HP and Torque gains

The Cool Hose for the 07.5-09 6.7L Dodge Cummins is now available!

Underhood temperatures can climb to over 150 degrees when towing up a steep grade.  Underhood heat surrounding the intake tube will conduct through the tube material and increase the intake air temperature by the time the air reaches the turbocharger.  Different tube materials conduct this heat at different rates; aluminum tubes have the fasted heat transfer, followed by steel and then plastic.  Rubber has only 1/36th of the thermal conductivity of plastic intake tubes.  The silicone rubber “Cool Hose” provides the coldest air to the turbocharger when compared to any other aftermarket intake tube.  “Cool Hose” with its true 4” inside diameter and long sweeping bends has one of the lowest air flow restriction and pressure drop design in the industry.