|
BD Super B / Towing Twin Turbos and Upgrade Kits 98.5-02 24V 5.9L Dodge Cummins 1045320P / 1045325
The secondary turbo in these kits is now polished!
If you already have the Super B (not Super B Special) single, and looking for even more air flow, you can now upgrade with your existing components to a set of Super B Twin Turbos
by adding one of our Super B Twin Turbo Upgrade Kits complete with all
necessary piping and second turbo! Or if you need a complete kit, we
also offer the complete BD Super B TWIN TURBO kits for your 24 valve Cummins!
Designed in a joint engineering effort between BD Diesel Performance
and BorgWarner Turbo Systems’ AirWerks program, these turbo systems for
the 5.9 liter Cummins engine flow enough air for racing applications,
yet are responsive and durable enough for street and heavy towing
applications. Plus, they’re backed by a one year factory warranty!
Featuring BorgWarner’s unique Extended Tip compressor wheel technology
and low inertia, full-floating journal bearings, these turbos utilize
BD’s unique dual-volute turbine housing. This proven design utilizes
low rpm exhaust pulses for improved turbine response, while the
dual-action waste gate bleeds off turbine drive pressure from both
volutes. BD's turbo systems also feature a heavy-duty waste gate
actuator that prevents pre-mature opening caused by high exhaust
pressure. You can even fine-tune your BD/AirWerks turbo for ambient
temperature and barometric pressure changes using BD’s adjustable waste
gate control.
Put simply, you'll get more power, quicker response, cooler EGT’s
(Exhaust Gas Temperatures) and lower exhaust emissions with a BD/AirWerks turbocharger!
TWIN TURBO SYSTEMS are designed for high-powered ‘94-‘07 5.9 liter
Cummins applications without cylinder head modifications, the Super B
twin can easily flow enough air for up to 575 rear wheel horsepower on
diesel only. Add a BD Cool-It intercooler and a shot of nitrous
oxide, and watch the power level climb! Great street and strip
driveability, easy installation, and the factory oil coolers can be
retained.
These kits are complete with all necessary intake and exhaust piping
and oil drains. Head studs are recommended when running twin turbos.
The 12mm ARP studs are fine with BD Twins. No head tapping required.
|