2007.5-2009 6.7L Dodge Cummins
Glacier Diesel Power "Maximizer" System
The "Maximizer System" is designed to work with '07.5-'09 6.7L Dodge Rams with stock in-tank lift pumps. We've had many requests from owners for a system to maximize the output and life of the stock in-tank lift pump. The "Maximizer System" does just that!
The Maximizer removes all of the restrictive factory lines and banjo fittings replacing them with custom stainless JIC adapters and full 3/8" fuel lines. No drilled out hydraulic adapters here! Factory fittings are a mere .185" diameter as opposed to the GDP stainless fittings with a full .300" diameter. That's a 250% increase in flow area through the fittings!
|
 |
New lines cover the connection from the factory steel supply line to the filter housing inlet and filter housing to CP-3 inlet. The stock lift pump stays in the factory location but overall pressure and flow to the CP3 is greatly increased. With a healthy in-tank lift pump, average gains above your current readings are 3 psi at idle and up to 7 additional psi at full throttle!
If you're under warranty and not ready for a full fuel system upgrade, or just trying to get the most form your stock in-tank lift pump, the "Maximizer" is the best alternative available!