The AEV differential cover for HD Rams is truly more than just a pretty face. While the majority of aftermarket differential cover manufacturers produce finned aluminum units to assist in cooling, the AEV cover is built out of nodular iron and designed to take any beating you want to throw at it. And if you've ever taken your Ram offroad, you realize that the front differential cover is the lowest point of contact, meaning it takes the brunt of any abuse from trail obstacles. In most cases, the stock stamped steel cover will buckle if it comes into contact with anything on the trail, causing fluid loss. And the aluminum aftermarket units can easily crack, resulting in the same issue.
Besides nodular iron construction, the AEV Ram Differential Cover features a vehicle specific fluid level verification port, placed at the correct level to meet factory specifications for the front axle, eliminating the need to guess on oil levels or use a dipstick to figure out the correct amount of oil.
For added convenience, this Differential Cover utilizes AEV's oversized fill port located on the top of the cover. This fill port not only allows you to easily add fluid in the field if axle repairs are necessary, but also doubles as an inspection port, allowing the user to see inside the differential, inspect ring gear teeth, look for water intrusion and even use a dial indicator to inspect for problems without ever removing the cover.
This is not just a pretty aluminum show piece - this is serious front axle protection for the people who need it most!
Please Note: This differential cover is designed to work with AEV DualSport Suspension Systems which moves the front axle forward, as well as stock configurations.
Besides nodular iron construction, the AEV Ram Differential Cover features a vehicle specific fluid level verification port, placed at the correct level to meet factory specifications for the front axle, eliminating the need to guess on oil levels or use a dipstick to figure out the correct amount of oil.
For added convenience, this Differential Cover utilizes AEV's oversized fill port located on the top of the cover. This fill port not only allows you to easily add fluid in the field if axle repairs are necessary, but also doubles as an inspection port, allowing the user to see inside the differential, inspect ring gear teeth, look for water intrusion and even use a dial indicator to inspect for problems without ever removing the cover.
This is not just a pretty aluminum show piece - this is serious front axle protection for the people who need it most!
Please Note: This differential cover is designed to work with AEV DualSport Suspension Systems which moves the front axle forward, as well as stock configurations.
Specifications
- SkuAEV-10404020AA
- ManufacturerAEV | American Expedition Vehicles
- MPN10404020AA
KEY FEATURES:
- Designed for 2014+ Ram 2500/3500
- Manufactured out of high-strength nodular iron
- Ram-specific fluid level verification hole
- Reuses the OE magnetic plug
- Reuses the OE rubber seal
- AEV's exclusive oversized fill plug
- Reinforced bottom edge with recessed hardware
- E-coated and powder coated for maximum durability
- Made in the USA
Videos
Blog Posts
Recommended Products
Recently Viewed
Added To Cart
AEV Front Differential Cover 14-23 Ram 2500 / 3500
Quantity: 0
Cart Total$0000.00