While there are a ton of options out there to replace and upgrade the stock turbo on your 5.9L Dodge Ram Cummins, few offer the ease of installation coupled with superior performance delivered by the Iron Horn Series by BD-Power. All together this turbo kit will increase flow, improve efficiency, and stand up to some of your toughest challenges while also being easy and straightforward to install.
If you are looking for an easy economical turbo upgrade, or, replace your tired turbo and aging exhaust manifold, then BD's Iron Horn series for your 3rd generation 5.9L Cummins offers a clean, drop-in installation. Featuring BorgWarner SX-E cartridges and 2-piece pulse exhaust manifold, BD's Iron Horn turbocharger kits are engineered to give optimal performance while reducing EGT's and high drive pressures. While you may or may not be going for racing, pulling, or drag the SX-E turbo was designed for SERIOUS POWER and supports that 950+ horsepower that your craving. In order to aid in simplicity, the high performance manifold is EGR compatible and retains the stock downpipe and intake instead of the "hot air" intakes or 2nd gen conversions.
No Shipping To CA
Specifications
- SkuBD-1045172
- Dimensions45 13.5 13.5
- ManufacturerBD-Power
- MPN1045172
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM turbo, providing enough air for more power, response and reliability
- Utilizes stock air intake and downpipe*, no need to change either for what you are currently running
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 5.9L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Comp Wheel: 63mm/ 2.48in
- Turbine Wheel: 76mm / 2.99in
- A/R Ratio: .91
- Flow: 79 Lb/min
- Approximate rated 550hp (depending on truck configuration)
- Not for sale on licensed California vehicles
- Air intake kits may need alteration other than K&N kit and OEM intake system
- Custom tuning is necessary for alterations to the VGT system when you install this kit
- 2003-2004 model years will require 2004.5-2007 style downpipe and clamp, both available options from above.
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Added To Cart
BD Iron Horn Series S363SXE/76 .91AR Turbo Kit 03-07 Ram 5.9L Cummins
Quantity: 0
Cart Total$0000.00