Fast and Free Shipping On Orders Over $100
No Salesmen, Just Enthusiasts 888.993.4373
A quick spooling turbo capable of 600 RWHP! The Aurora 4000 is an upgraded turbo charger that is great for added performance on your 03-07 Dodge 5.9L Cummins. The Titanium 64mm inducer compressor wheel on the turbo is a significant jump in performance over the stock charger. This turbo has the capability to reach 600hp with supporting fuel modifications and higher tuning levels with the ability to run 70+ psi. The increased air volume will utilize all fuel injected into the cylinder creating a more complete and efficient combustion event. This will result in lower EGTs, high horsepower capabilities, and a more efficient/powerful torque curve.
RECOMMENDED ADD-ON PARTS - With the installation of an upgraded turbo, such as this Aurora 4000, we highly recommend also upgrading the exhaust manifold. Besides the simple fact that there is no better time to do so because the turbo will be off, there are many performance advantages, as well. The higher flowing exhaust manifold will assist the turbo to light sooner and provide more boost/air flow throughout the entire RPM range due to a reduction in the factory bottlenecked manifold. And quite simply, the line of ATS turbos are originally designed and tested with one of their Pulse Flow manifolds installed, so you will receive the maximum gain by installing as a package. Also, the multi-piece design provides an area for expansion/contraction to occur, which will nearly eliminate the possibility of a cracked manifold, which leads to a serious performance disadvantage. Finally, this manifold is built with a pre-threaded port making the installation of a pyrometer thermocouple a breeze.
- ManufacturerATS Diesel Performance
- Ability to support 600hp
- More efficient and useful torque curve
- Great all around performance
- Designed for street/drag strip/sled pulling performance
- Safe for stock motor and components with proper tuning
- Lower EGTs under most applications
- Reduces turbo "bark" due to ported compressor housing design
- Great performance gains
- Great spool time and low-end torque
- 150-200 degree drop in EGTs
- 1190cfm flow rate
NO VIDEOS AVAILABLE
- 0 Reviews
- 0 Questions
Does this turbo match to the oem intercooler pipe??
Yes that turbos compressor cover matches up with the stock turbo to intercooler pipe. it has a 90 degree compressor outlet not like it is pictured.
i have an 03 2500 cummins with the following item 60hp nozzles, Banks 3 1/2"air horn, AFE monster filter, AFE exhaust manifold, FASS 95gph, smarty J-06 tuner and 4" exhaust downpipe to tip, fleece fuel block and new R47 auto with Billet flex plate, Billet Single TQ and input shaft with shift kit and goerend pan. I need a new TURBO that will work with my setup now, its not a daily driver as much as it tows more miles than a driver, 13k-20k payloads, largest grades are mtn passes. please help selecting the right one! future upgrades are intercooler, head studs, i have only 18k on new engine, 4k on tranny.?
There are a couple options available for your setup. I would advise you to give us a call and we'd be happy to go over some options with you. -MC