Fast and Free Shipping On Orders Over $100
No Salesmen, Just Enthusiasts 888.993.4373
The Carli Linear Rate Coils Springs for 4th Generation Cummins are designed to deliver the highest grade of ride improvement out of a single component upgrade possible. While these are the same coils used in all of Carli's complete systems, they also make a great upgrade for those either looking to improve the front end handling, while leveling out the truck, or possibly are piecing their entire system together.These coils feature 2.75" of lift for a properly leveled out stance, as it was shown that many trucks sat somewhat nose high with the previous 3" springs, and potentially could have driveline vibration. The Linear Rates were also chosen over the original Multi-Rates to eliminate possible coil chatter coming from the secondary coil rate.
- ManufacturerCarli Suspension
- 2.5" - 3" of Lift Depending on Cab Configuration
- Black Powdercoated
- Guaranteed Under the Harshest Conditions
- Sold as a Pair
NO VIDEOS AVAILABLE
- 0 Reviews
- 0 Questions
Hi, what is the spring rate of these springs compared to the original??
The spring rate is not available to the public, however these will be a much better riding and rate over oem.
Says 2.75-3 inches DEPENDING on cab configuration, which is it ? I just want to level not sit nose high. 13 crew cab short box , also could I use bilstein 5160 shocks with these coils??
Crew cab applications should be closest to 2.75"", due to the heavier cab. The 5160s would be compatible yes.
Will this work with the Fox 2.0 shocks??
As long as they are the correct length they will work just fine. Two good quality components.
ON a 2011 Cummins 2500 with the 2.75"" Carli coils will i be able to install factory 20"" wheels from a 2017 Cummins with BFG 285-65-20 (34.5"") without the tire rubbing??
Yes and no, this will just depend on the wheels offset or backspacing.
Can you still use factory shocks??
No you need to get longer shocks for a lift. DppSands
I have a 4.5" lift with fox 2.0 shocks. If i remove the lift and replace front springs with these, can I still use the longer shocks front and back??
You would need the Fox shocks designed for a stock- 3" lift. Your current ones will be too long. -MC