Eliminate the infamous Powerstroke #8 injector knock and fuel starvation
with this kit from CNC Fabrication. This kit works great from stock injectors to how ever large you want to run. It is a kit that is for the DIY person wanting to convert their truck to an electric fuel pump system. All you need is some 1/2" 100psi minimum fuel rated hose/line from the customer supplied pump assembly up to the fuel distribution block, and you're good to go.
You can also build your own pump setup if you like. CNC recommends using a stock Superduty Bosch pump for stock to 160/30 injectors, the AEM 400lph pump for mild built trucks for above 160/30 to 250/100 injectors, or the Fuelab Prodigy pumps for competition trucks running 300cc or larger. For a more plug-n-play type fuel pump/filter setup, CNC recommends the AirDog II 4G Fuel Pump as it has the filters and regulator built in, a lifetime warranty, and is simple to install as all of the legwork for finding fittings/adapters comes with the AirDog kit. For those that would like to reuse your factory fuel pump, select the fuel bowl relocation kit. This is a more affordable option over a FASS or AirDog fuel pump setup.
You can also build your own pump setup if you like. CNC recommends using a stock Superduty Bosch pump for stock to 160/30 injectors, the AEM 400lph pump for mild built trucks for above 160/30 to 250/100 injectors, or the Fuelab Prodigy pumps for competition trucks running 300cc or larger. For a more plug-n-play type fuel pump/filter setup, CNC recommends the AirDog II 4G Fuel Pump as it has the filters and regulator built in, a lifetime warranty, and is simple to install as all of the legwork for finding fittings/adapters comes with the AirDog kit. For those that would like to reuse your factory fuel pump, select the fuel bowl relocation kit. This is a more affordable option over a FASS or AirDog fuel pump setup.
No Shipping To CA
Specifications
- ManufacturerCNC Fabrication
- MPN422014 | 422015 | 422016 | 422017 | 422018 | 422019
FEATURES AND BENEFITS:
- Meant for installation with factory or aftermarket drop-in style turbos
- Upgraded with aerospace/military grade high flow flareless fittings
- Eliminates many leak points with the stock factory fuel pump and fuel bowl
- Base plate and distribution manifold are pre-assembled for easier installation
- High quality billet T-6061 aluminum
- All lines are made of mandrel bent 304 Sandvik Coromat seamless stainless steel tubing
- Every single kit is test fit during production to ensure perfect fitment
- Comes with all necessary fittings, o-rings for turbo pedestal, and bolts, for a complete install.
- Test port to measure/set fuel pressure
- 1/2" AN (-08) inlet for plenty of volume of fuel for unlimited size injectors
- Lines are bent in the U.S.A. right here in our shop on our state of the art 3 axis CNC tubing bender for a perfect fit every time
IMPORTANT NOTE:
- Pump, regulator, and filters will need to be purchased
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Added To Cart
CNC Fabrication High Flow 4 Line Fuel Feed Kit with Fuel Bowl Delete 99-03 7.3L Ford Powerstroke
Quantity: 0
Cart Total$0000.00