2007.5-2010 6.6L LMM GM Duramax
Fuel Related | Lift Pumps | Injection Pumps | Injectors
The stock high pressure Bosch CP3 Injection pump has the ability to flow plenty of fuel to produce 450HP without a lift pump. HOWEVER, doing so puts an enormous amount of stress on your expensive injection pump requiring it to work that hard. We have found that by adding an in line fuel pump will drastically increase the life of the CP3, also allowing those who are adding additional fueling through chips/programmers to realize the full potential of their power.
We carry systems from FASS, Pureflow (Airdog), BD, and Fuelab that will help maintain proper fueling. Many of these systems allow you to choose either a stand alone pump, or a pump with fuel filters and water separators which removes entrained air, reducing the chance of injector failure. We even offer stand along filter/separator kits from various companies for those merely looking to prolong the life of their factory fuel filter or other fuel related components. And for those really needing that push, we carry single performance and dual CP3 injection pumps, high flow injectors, and every other fuel related performance components under the sun to ensure you've got the right amount of fuel on hand at all times.
As always, if you have any questions about which part is right for you and your truck, do not hesitate to give us a call or send an e-mail to email@example.com and we would be happy to assist.