How does improved power, efficiency, and maximized flow sound for your 2017-2019 Chevrolet/GMC 6.6L Duramax L5P? You can get those benefits with Mishimoto’s intercooler pipe and boot kit. How so? Well, the factory L5P intercooler pipes are a measly 2.5" diameter that chokes the engine, while tight bends and a resonator on the hot side create even more restriction.
The difference is that Mishimoto’s intercooler pipes are 3" in diameter throughout with smooth transitions to significantly increase airflow, resulting in more power potential. The hot-side pipe also eliminates the stock resonator for maximum flow. Combined, the Mishimoto intercooler pipes are up to 55% less restrictive than stock.
Both the hot-side and cold-side utilize a two-piece design for ease of install. To connect the pipes to the Duramax, this kit also includes Mishimoto’s silicone boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the boots by preventing leaks and blowouts.
To add even more reliability, this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. The cold-side intercooler pipes also feature a CNC-machined quick-disconnect fitting with new O-ring and spring clip to ensure a secure and leak-free fit. Unlike other available pipes on the market, Mishimoto’s pipes retain the intake air temp harness mounting location for safe and secure wire routing, just as Chevy/GMC intended. The intercooler pipes also incorporate two bungs that can be drilled and tapped for sensors, so you can easily monitor your L5P's performance.
The Mishimoto 2017-2019 Chevrolet/GMC 6.6L Duramax L5P intercooler pipe and boot kit is a direct bolt-on upgrade and is available in a polished or wrinkle black powder coated finish. Like all Duramax products, this kit includes our Mishimoto Lifetime Warranty.
IMPORTANT NOTE:FOR OFF-ROAD USE ONLY
No Shipping To CA
Specifications
- ManufacturerMishimoto
- MPNMMICP-DMAX-17KP | MMICP-DMAX-17KWBK
- (3) Aluminum Intercooler Pipes
- (1) Aluminum Intercooler Pipe w/ O-Ring and Spring Clip
- (5) Silicone Boots with DuraCore™ Technology
- (10) Constant-Tension T-Bolt Clamps
- Mishimoto Lifetime Warranty
- Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
- 3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
- Up to 55% less restrictive than stock piping
- Includes new quick-disconnect O-ring and spring clip
- Hot-side eliminates stock resonator for maximum flow
- Eliminates failure-prone stock throttle valve connector
- Retains temp sensor harness mount for safe and secure wire routing
- Internal bead roll ensures secure connection between coupler and throttle valve
- CNC-machined quick-disconnect ensures precise, leak-free fit
- Additional bungs can be drilled and tapped for sensors
- Requires no additional tuning
- Includes Mishimoto silicone boots with DuraCore™ technology and Mishimoto constant-tension T-bolt clamps
- Available in polished or wrinkle-black powder coated finish
- INSTALLATION TORQUE SPECS: 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).
- PIPE DIAMETER: 3"
- CONSTANT TENSION T-BOLT CLAMPS SPECS:
- (1) 3" Constant-Tension T-Bolt Clamps
- (5) 3.25" Constant-Tension T-Bolt Clamps
- (4) 3.5" Constant-Tension T-Bolt Clamps
- PIPE MATERIAL: Aluminum
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Added To Cart
Mishimoto Intercooler Pipe and Boot Kit 17-19 GM 6.6L Duramax L5P
Quantity: 0
Cart Total$0000.00